Author |
Message |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Cmmfiremedic
| Posted on Monday, November 01, 2010 - 09:18 am: |
|
Ok I know this is long but I need some help guys. I have a problem with my bike and not having any luck trouble shooting. Two weeks ago i rotated the engine and did valve clearence checks. I had to change shims in 6 of the valves. Everything went great. I changed the plugs. The screen on bottom of engine was clear. I put everything back together and all was good for several days. This past friday while riding to work several times it felt like something was holding me back then all of sudden it would brake loose. The tach stays steady. The bike isn't missing or running bad its just like im tied to a tree. I thought the throttle might have been hanging. I took the airbox off and checked everything. I unhooked both ends of cables and oiled. I rode it for about 50 miles. It was better but still a problem. I took both wheels off, checked both brake calipers and pads. Still couldn't find a problem. So I took the rear pads completely out and rode with the same problem. When it happens the nose of bike doesn't dive or pull like the front is grabbing. I don't see any indications the belt or pullys are hanging on anything. It happens in several different gears usually between 4000 and 5500 rpms. Anybody got ideas on what I have missed? |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Stimbrell
| Posted on Monday, November 01, 2010 - 09:36 am: |
|
Just a thought, but sounds like the active intake system is working, if the bike was de-noided have you accidentally reconnected the solenoid ? |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Cmmfiremedic
| Posted on Monday, November 01, 2010 - 09:53 am: |
|
It is de-noided and the cylinder is completely taken off the bike. I don't get any kind of light or anything. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Trafford
| Posted on Monday, November 01, 2010 - 10:06 am: |
|
Sounds like firing on one cylinder then chiming in suddenly on two. leads? Caps? |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Cmmfiremedic
| Posted on Monday, November 01, 2010 - 10:14 am: |
|
Ok I will give that a try. I will check the plugs and both coils. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
1125rcya
| Posted on Monday, November 01, 2010 - 10:55 am: |
|
"I pulled out the 1125R motor and completely took it apart to find the binding gear. Mainshaft and the suspected 5th gear looked okay, the 5th gear was still the old type so it was a good thing we opened up the engine and we replaced it anyway. We did find a piece of plastic that was being chewed trough the gears, we still are puzzeling were that piece was coming from and how it ended up in the engine, all shields, guards, guides and plastic gears were okay." Read this in an artical. http://www.twinmotorcycles.nl/artikelen.asp?aid=76 |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Avalaugh
| Posted on Monday, November 01, 2010 - 02:43 pm: |
|
cmmfiremedic, have you got a Erik Buell Racing ECM ? similar symptoms i'm experiencing, but with the standard ecm im getting fault codes but bike runs great ? See this thread http://www.badweatherbikers.com/buell/messages/290 431/600445.html?1287275193 Still not got to the bottom of it but some good info there. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Stimbrell
| Posted on Monday, November 01, 2010 - 03:08 pm: |
|
You mention that oiling the cables helped, that would suggest something is binding or a return spring is not doing its job somewhere in the throttle area, I'm just thinking it is most likely to be connected to something that happened during the engine rotation you just did, the old adage, check what you did last. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Cmmfiremedic
| Posted on Monday, November 01, 2010 - 03:23 pm: |
|
I have went threw everything I did except the spark plugs I changed. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Drawkward
| Posted on Monday, November 01, 2010 - 05:12 pm: |
|
TPS reset? |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Cmmfiremedic
| Posted on Monday, November 01, 2010 - 05:32 pm: |
|
No I havent done that I will have look in service manual to see how to do it? |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Aeholton
| Posted on Monday, November 01, 2010 - 07:46 pm: |
|
No I havent done that I will have look in service manual to see how to do it? http://www.badweatherbikers.com/buell/messages/290 431/561521.html?1285617127 |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Blk09r
| Posted on Monday, November 01, 2010 - 08:12 pm: |
|
Did you tie the linkages together when you removed the solenoid? More info here.... http://badweatherbikers.com/buell/messages/290431/ 490767.html |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Cmmfiremedic
| Posted on Tuesday, November 02, 2010 - 12:21 pm: |
|
I tied the linkage last night and reset the TPS and still have the same problem this morning. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Blk09r
| Posted on Tuesday, November 02, 2010 - 02:04 pm: |
|
A friend of mine has a Gold Wing that suddenly started having similar problems to what you are having. He had a pair of gloves under the seat that got sucked into the intake. You might want to check the intake to see if anything might be blocking it. It's a long shot but you never know. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Sportster_mann
| Posted on Tuesday, November 02, 2010 - 06:49 pm: |
|
When you dropped the engine it is possible that one of the engine breather hoses that go into the airbox is not routed exactly right - others have reported that this can cause the throttles to "stick" as it rubs against the hose - do a search of the archives as the info should be in there somewhere. |