G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   2brdy Posted on Tuesday, September 09, 2003 - 11:00 pm:        looking for fuel tank, fairing, right side deep saddlebag cover for a 98S3, paint condition or color not as important as good usable part. want to do a color change and would like to hold onto stock parts. thanks for any help,allen   Jasons1 Posted on Wednesday, September 10, 2003 - 09:17 am:        Al...Thanks for the link. There are currently two Buell clutches on EBay. Both are going for $100 and have no bids. One has 10K miles on it, and the other has 13K. I think I was fairly lucky to get 35K on mine, and would think that 15-20k is more typical. Don't you guys thing that $100 is a lot of something with those kind of miles on it? I was looking a jpcycles.com, and they have aftermarket replacement kits with both metal and friction plates for around $80. That's the direction I'm leaning towards right now. While we're on the subject, does anyone have a spring compression tool that is required to remove the clutch plates? Or is there a similar tool that I could purchase somewhere that would get the job done? Thanks again guys. - Jason   Shooter Posted on Wednesday, September 10, 2003 - 09:24 am:        Jason, motion pro makes a nice one that comes complete with the adapter necessary for the XL clutch.The typical big twin style sold by all the others will work with an adapter or a little creativity.Don't put a heavy duty spring in there, and the extra plate clutch isnt worth it in my opinion.   Bremobiker Posted on Wednesday, September 10, 2003 - 10:56 am:        Thanks for the input. I've found the desired stock muffler. Hey shotgun, the stock can is nice to have for long rides/road trips. The V&H sure is clean, light weight, and sounds good, but my head get's weird (or weirder) after a couple hundred miles. And the rear bracket is not reliable, I've had to weld it twice. Dan   Bremobiker Posted on Wednesday, September 10, 2003 - 11:03 am:        Leeaw, Thanks for your kind offer. I have a V&H, that I swap out for the stock unit from time to time. Thankfully it was not on for this ride. Dan   Katfish Posted on Thursday, September 11, 2003 - 10:15 pm:        I need a speedomete(mechanical drive) for 97 S3T. also a cable and Instrument panel. I have extra: forks, stock handlebars,controls,stock seat,front brake caliper. Scott   Jasons1 Posted on Friday, September 12, 2003 - 09:08 am:        I ended up buying the Milwaukee Twins friction plates and steel drive plates from J&P cycles. Cost me $75 + $35 for next day delivery (gotta enjoy every remaining riding day here in Ohio...they're getting rare). Still a lot cheaper than from HD. My 8 friction plates alone would have cost me $160. Thanks for the advice guys. - Jason   Bud_man Posted on Friday, September 12, 2003 - 03:18 pm:        Front Fender for S1 Lightning. I need a replacement front fender for my 1997 S1 Lightning. I'd like it in black, or carbon fiber ... silver would do too. Let me know if anyone has one, condition and price. Thanks. - Bud   Devdawg Posted on Friday, September 12, 2003 - 09:03 pm:        I'm looking for the mounting hardware to mount a chin spoiler on an M2. I have all needed part numbers, but all the dealers I've contacted won't sell them individually. Anyone have an old set lying around they'd like to get rid of?? Thanks, Carl   Leeaw Posted on Saturday, September 13, 2003 - 08:55 am:        Try Daves or Manchester HD, as any dealer should sell you the parts. I got them when I needed them. Pick another dealer!   Mr_bill Posted on Saturday, September 13, 2003 - 04:22 pm:        Hello. Does anyone happen to have an ignition lock (switch) available? The one in my S-3 failed on me, and every dealer I call wants $140 for a new one!!! $140!!! I'm in shock... F@#$in' gold-plated Harley parts... Thanks for any help. Bill Phoenix   Blackcatracing Posted on Sunday, September 14, 2003 - 07:25 am:        Mr Bill We posted on ebay a couple of days ago. Starting bid was $25.00 You might want to take a look. Thanks   Buelliedan Posted on Sunday, September 14, 2003 - 10:04 am:        Mr Bill, Any three wire switch that works for a HD will work on a Buell. You will just have to splice the wires together. Dennis Kirk sells on for $19.95 part no: H20-245. Phone no: 1-800-328-9280   Blackcatracing Posted on Monday, September 15, 2003 - 05:55 am:        Dan: Here I am trying to make a $ and you give the guy a great way to solve his problem !!!!! Be Safe BTW, if you buy the one on ebay, you do not have to splice the wires. enjoy Tom   Tavs Posted on Monday, September 15, 2003 - 03:35 pm:        Anybody got an X1 front fender (black) that they want to trade for a white one? Mine's in great shape. Thanks.   Bads1 Posted on Monday, September 15, 2003 - 10:17 pm:        I have a Blue/Black Vanson size XL leather jacket in mint condition that I would like to trade for the same size and condition Vanson leather jacket in either Black/Black or Red /Black.And no I don't want any other brand jacket guy's.Thanks Dana aka BadS1.   Mikej Posted on Tuesday, September 16, 2003 - 08:53 am:        Dana, Contact BluzM2. Don't know if he got a jacket yet but that's what he was looking for. The two of you might or might not be able to swing some sort of a deal. He's out playing in the salt this week though.   Bads1 Posted on Tuesday, September 16, 2003 - 01:15 pm:        Thanks Mike.   Loki Posted on Tuesday, September 16, 2003 - 08:13 pm:        in search of: a ham can center trim piece, black or silver for a S1 any help out there? a part number or source of?   Josh_ Posted on Tuesday, September 16, 2003 - 08:44 pm:        Loki, I have one. New in the bag I think I paid $7 incl ship.