| Author | Message | ||
     The_wild_one |
please read the whole thread: i used to love her, but i have to kill her... like the G N R song says... with ache in my hearth, i have to do it to buy another buell (tuber). ok parting '97 M2 completely minus motor (seized) electrics, and the tail fairing... everything else's for sale... so first in line,first served... ok? the frame also can be sold but just with a bill of sale, i'm keeping the motor, and no it's not for a chopper, at all, it seized. and i'll wait for the right time to rebuild it. also i have a '97 S3 with Clean CA papers coming this week,(i bought it and the guy is sending it to me, this week i will have it) so probably you can get parts from me, and the frame, and make it a roller. also X1 swingarm (2000 model) complete with motor mount, well i have almost two tubers in parts, like i said minus engine and electrics. if there's no interest here i will put the parts on flebay... check the bike decide what you want ask the prices and we part from there, ok... paypal only and shipping after payment clears. paypal and e mail are (same address): kawiman28@hotmail.com  | ||
| The_wild_one |
the picture of my M2 when i got it... some of you know what happened to my M2, bought it 3 months ago the guy was a scumbag, fell for a 1420cc motor,paid $3,000 paid another $1500 in parts and labor and 50 miles later i have a motor seized.  pics of some of the parts... | ||
| The_wild_one |
-x1 2000 swingarm complete with motor mount, really clean, complete with axle, spacers, adjusting blocks, and brand new adjuster bolts $220 shipped (flat to continental usa) -s3 showa forks part no: RJ0120. MR/LJ0120 ML/ G922-50 they come complete with upper and lower clamp, top bolt, bearings, everything, including bar clamp. $350 plus shipping obo | ||
| The_wild_one |
M2 forks, complete with fork brace bearings, steering stem, upper and lower clamps, bar clamp, headlight mounts... everything there missing only the bar clamp bolts. $280 plus shipping... | ||
| The_wild_one |
vance & hines almost new (only 50 miles) still have the box, $220 plus shipping stainless performance BUELL OEM header for pre 99 buells (it goes on top of the frame) 2.5 " outlet,no bung for O2 sensor with less than 50 miles, and with black ceramic coated guard: $220 usd plus shipping. 16." shock, open to offers, the same for the wheels, frames, etc, etc, etc. i just gave numbers for the parts that i know the used market prices aka ebay, forum, etc. the parts that i just bought like the header, exhaust, and few other ones have less than 50 miles, the parts on the M2 some of them i don't know because the last owner, didn't know nothing about buells. but the actual mileage today marks 22,000 miles. i have even the speedometer,complete with the rev meter (u guess right for sale too). so shoot me an email, for more info and pics (i cannot "reduce my images" to put them here on the forum) and i'll send you pics, info and prices, open to offers, i just need to complete some money to buy a certain X1 millenium (CF) that i set my eyes on. | ||
| The_wild_one |
any part that you have in mind ask and you will receive info and prices... thanks again | ||
| Dammitquikgentry |
Pm sent on wheels | ||
| Cyclonecharlie |
PM sent on shock | ||
| Whitetrashxb |
pm sent on tank | ||
| Jayvee |
pm sent | ||
| The_wild_one |
i'll be answering during the day, also, the moto gp fairing is for sale, it already has the tail light included, EVERYTHING IS FOR SALE, except motor and electrics... | ||
| The_wild_one |
PM'S sent, check your mails... | ||
| The_wild_one |
the other side of the bike  | ||
| 13was13 |
PM sent on steering damper. | ||
| The_wild_one |
ok here's some prices... for the pair of wheels...$300 plus shipping shock shipped $180 shock mount shipped $60 drag pipes chromed $240 shipped SHOWA (inverted) forks complete with steering stem, upper and lower clamp, bar clamp $300 plus shipping obo M2 forks complete with steering stem, upper and lower clamp, bar clamp $250 plus shipping obo vance & hines ssr only 50 miles on it $230 shipped BUELL performance stainless exhaust header, for previous 1999 models (goes on top of the side of the right side of the frame) with 2.5" outlet and with exahust guard (powder coated black) included $240 shipped obo again, everything is for sale except motor parts, and electronics, parts gotta go, speedo, rev counter, bars, bodywork (complete gp conversion tail with s1 seat)etc, etc, etc. make offers or ask for info and pics to: kawiman28@hotmail.com | ||
| The_wild_one |
steering damper $320 shipped obo to the continental USA | ||
| The_wild_one |
  pics of the engine, i'm open to offers no low ballers, please i know what is worth it is a: 1420 cc, with S&S cylinders and rods, JE Pistons, lockhart oil cooler, windage tray, external oil lines. and zippers performance push rod conversion kit for leak free easy adjustment. the engine is sold ONLY with the complete harness dyna programmable, twin fire ignition and the 40,000 volt high ignition coils. now the motor is seized on the rear cylinder, this is for someone who REALLY knows how to rebuild these engines. if the right offer dosn't come i'll just keep it, i'm in no hurry to get rid of it. | ||
| The_wild_one |
also i forgot to mention, the motor will come with the frame (1997 M2), harness and paperwork from the dmv, clear CA title. current stickers paid until june 2011. also i have a 1997 S3 FRAME WITH CLEAN CA TITLE. you can come to my garage, check what you need and we can work a deal, you can make 2 rollers almost, easily. for these parts : pick up only i'm in in So. California | ||
| The_wild_one |
i have received, several emails asking me prices about the oil cooler, cases, etc... i'm not taking any part of the engine out, read the previous post, i'm selling it altogether with harness, title and frame... ONLY thanks, hope you understand | ||
| Jsunstar |
Pm sent about m2 front fender, flyscreen and shifter setup. | ||
| The_wild_one |
PM Sent... | ||
| The4ork |
ive really been looking for a frame, how different is this frame than a s1? im wondering if i can replace my damaged S1 frame with this one...? and id love to have that tail/seat too  | ||
| The4ork |
turns out with some minor mods, yes i can. how much for the tail/seat/frame? | ||
| The_wild_one |
where are you located? and what frame do you want? M2 or S3? e mail me to: kawiman28@hotmail.com | ||
| The4ork |
im central california, Fresno. the frame in the pic is a pre 99 m2 right? i might be interested in quite a bit of it. | ||
| The_wild_one |
PM sent | ||
| Jsunstar |
Don't bother calling dibbs... Still looking for black front fender and flyscreen...anyone? | ||
| The_wild_one |
look, you snooze you loose... what do you want me to say?... you weren't the only one looking for those parts... plus read the post: SINCE THE BEGINNING OF IT: "ONLY ACCEPT PAYPAL"... READ FIRST! | ||
| Jsunstar |
sorry, didnt see that, i also have paypal. you could have just told me that without being saucy... good luck with your parting... (Message edited by jsunstar on September 11, 2010) | ||
| The_wild_one |
Jsunstar" you act too polite here, not the same way as you did in the mail you sent me... calling me "ignorant"... thanks for the interest, anyway... guys, you can thank this kid Jsunstar...no more parts for sale here everything is going for sale on ebay, frames, motors, etc... thanks to the rest of you, serious people, you know who you are... |
