G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Knowledge Vault (tech, parts, apparel, & accessories topics) » Troubleshooting (Poor Starting/Running/Handling/Ride Issues) » Archive through February 02, 2011 » Tuber rev limiter ?

« Previous Next »

Author Message   Tainted Posted on Sunday, September 05, 2010 - 07:03 am:        I have a 97 s3 thunderbolt, vance and hines, forcewinder, dynojet installed. runs good but seems to go into a rev limit at 6500-7000 rpms according to the factory tach, in all gears and runs out of power as if you're out of fuel, is this normal for these bikes? what rpm can you run them to? i haven't had v twin sport bikes before this one. thanks for your help   Blake Posted on Tuesday, September 07, 2010 - 10:06 am:        Hard rev limit is at 6800 rpm. Timing is slightly retarded beginning at 6200 rpm. A race ignition module will eliminate the timing retardation but keep the same 6800 hard limit.   Tainted Posted on Wednesday, September 08, 2010 - 04:41 pm:        thanks for the information

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: