Author |
Message |
Gusmiami
| Posted on Sunday, August 29, 2010 - 12:03 pm: |
|
Does anyone know if the turn signals from a 2010 Uly will fit on a 2008 Uly? Is it a direct swap? Seems as though the 2010 turn signals aren't as flexible and therefor won't wobble and bounce around like pre-2010 models do. That's one of the few things that's always driven me nuts about my uly and if I can swap those out it would be great. |
Hotcad
| Posted on Sunday, August 29, 2010 - 01:22 pm: |
|
Yes they will, I put them on my 07. They work fine. |
Gusmiami
| Posted on Sunday, August 29, 2010 - 01:35 pm: |
|
Am I correct in that they don't flop around like the pre-2010 models? |
Treefrog
| Posted on Sunday, August 29, 2010 - 08:18 pm: |
|
I put them on the front of my 08 and they still flap like they are trying to fly away. |
Gusmiami
| Posted on Sunday, August 29, 2010 - 09:42 pm: |
|
That sucks. How hard could it have been to make some rigid turn signals that wouldn't flop around like a fat girls ass while jogging |
Gambito
| Posted on Sunday, August 29, 2010 - 10:01 pm: |
|
I put a set on my '09 for the looks, the originals were too ugly for me. Chances are they'd just snap off if they couldn't flop around... |
Mnrider
| Posted on Monday, August 30, 2010 - 04:20 pm: |
|
If you take the spacer off the front T/S and put it on the inside of the dash housing they don't flap as much. |
Treefrog
| Posted on Tuesday, August 31, 2010 - 09:25 pm: |
|
I don't mind the flapping. While stopped I always get the, "Hey your blinkers are broke". Then watch their faces as I feed a little throttle to it and they smooth out. |
Blk_uly
| Posted on Tuesday, August 31, 2010 - 11:07 pm: |
|
"A fat girls ass while jogging" BAD visual on that one |
Gusmiami
| Posted on Wednesday, September 01, 2010 - 12:48 am: |
|
Hey it got the point across didn't it? |
Nadz
| Posted on Wednesday, September 01, 2010 - 01:09 am: |
|
The interface is the same, and the appearance is definitely worth the expense. If you get the 2010's, just get rears for the front. No extender so less jiggling. |