| Author | Message | ||
     Arcticcr |
I've got a new, never even added fluid, Nissin radial master cylinder (19 mm bore). I was going to use it on my 1125 and it will therefore work on all 8 piston setups (not sure about 6 piston setups). This is the same kind used on the XBRR and sold at American Sportbike at this link: http://www.americansportbike.com/shoponline/ccp0-p rodshow/16106-19.html I'll let it go for $175 shipped. Thanks for looking, Jay Note: You'll have to fab up a little bracket to mount the reservoir. | ||
| Arcticcr |
Any one? | ||
| Tq_freak |
thinking about it | ||
| Arcticcr |
Just let me know Tq_freak; thanks for the interest. Jay | ||
| Nattyx1 |
PM sent | ||
| Shaggy |
Will this use the stock XB levers? If so I'm interested. | ||
| Arcticcr |
Shaggy, Yes this will work with an XB, as long as you have an 8 piston, rather than a 6 piston. Jay | ||
| Shaggy |
I should have asked if my CRG lever will work with it? | ||
| Arcticcr |
Shaggy, I'm not sure on the CRG levers, but would guess that they wouldn't work. Jay | ||
| Arcticcr |
Bump | ||
| Smoke |
mine uses a gsxr lever 04-08. tim | ||
| Arcticcr |
Smoke is correct,in fact, the whole MC body, 19 mm bore and all, is used on the GSXR. | ||
| Skinstains |
How about $150 ??? | ||
| Froggy |
Skin, this is the same MC you installed on my XB. | ||
| Skinstains |
Thanks Froggy, good lookin' out, but my stable has changed a bit since you were last here. The boys race bike has an XBRR front on it and there is now another race bike in here with the brick on it so I'm figuring a spare is in order. | ||
| Skinstains |
How's about down the middle at $162.50 ? | ||
| Arcticcr |
Skinstains, That sounds reasonable to me. I’ve got two levers, a silver, which was the stock color on the XBRR or black, which would you prefer? If you’re doing PayPal, my account ID is GN231Racing@hotmail.com. Thanks, Jay | ||
| Arcticcr |
I've not heard back from Skinstains. Therefore, still for sale, unless I hear from Skins soon. Going on eBay this weekend. (Message edited by Arcticcr on September 08, 2010) | ||
| Pizzaboy |
dammit!! me want badly!! just cant afford at the moment!! just sent Erik Buell Racing money today to get some repair parts for my bike that got mad last weekend at the track! | ||
| Skinstains |
I'm still here... How do you want the loot ? I'll get it out today. | ||
| Arcticcr |
Skinstains, You can pay me by PayPal or you could mail me a check, which ever you like. If you'd rather mail a check, let me know and I'll PM you my address. Thanks, Jay | ||
| Nattyx1 |
Did Skinstains come thru with the $? If not, I'm interested | ||
| Arcticcr |
I'm very sorry guys, however, I only have the 17 mm version m/c. I had planned on the 19 mm for my CR and 17 mm for my 6 piston track bike, that's why I mentioned having both colors for levers. Thanks, Jay P.S. I'll be making a post for the sale of the 17 mm M/C if any ones interested in that. |
