G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Vospertw Posted on Saturday, August 14, 2010 - 07:28 pm:        All, Picked up some bar risers today and really didn't like the way they looked after installation - so I threw the bars back on without the risers so I can be ready to take it for a spin tomorrow. However, when I finished I noticed I have about a 3mm gap between the top clamp and bottom clamp at the rear of the handlebars. Front of the clamps are snugged together. I followed the service manual (I think) - turned each bolt in a few turns in sequence so the top clamp would come down evenly, and then tightened front bolts first, then rear (pretty much the way I've done every other bike I've owned). Seems like there was a small gap in the rear of the bars before I started but I'm old and don't trust my memory - can anyone confirm? Second question, service manual says to use Loctite 271. That seems pretty darn strong for those threads. I put a drop of Honda Medium on each bolt and even that made me nervous... is everyone using 271 on the handlebar bolts? (Message edited by vospertw on August 14, 2010)   Andymnelson Posted on Sunday, August 15, 2010 - 12:26 am:        there will be a gap. Torque to spec and you'll be good to go. I like to tighten them down so the gap is even. no loc tite on mine! With SS bolts going into aluminum, it is entirely uneccessary. But the standard will be good.   Vospertw Posted on Sunday, August 15, 2010 - 12:44 am:        Andy, thanks. I'm going to give the risers another shot tomorrow. I've never used loctite on other bikes, but the torque spec was generally higher on those as well. I'll see how it feels tomorrow.   Cmostech Posted on Sunday, August 15, 2010 - 10:55 am:        I am also looking to put risers on my XB I have a XB9R any suggestions?   Vospertw Posted on Sunday, August 15, 2010 - 11:04 pm:        Cmostech, depends on how much rise you want. I put Precision Engineering 1" risers on and they were great for me. Nice thing about the 1" risers is that you can use the stock cables. You could also go with another bar style with more rise without adding risers.   Madiro Posted on Monday, August 16, 2010 - 05:09 pm:        Hi Buelligan from Bonnie Scotland. I thought I had posted this already but can't see it. I'm new to forums! Can't find a supplier of risers for my x1. Just want 1" Can anybody help....PLEASE cheers Madiro   Vospertw Posted on Wednesday, August 18, 2010 - 04:51 pm:        Madiro, I see the same risers as mine are listed at American Sport Bike for the X1.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: