Author |
Message |
Gowindward
| Posted on Monday, August 09, 2010 - 11:26 am: |
|
I have a small oil leak at the drain plug. Anyone know what size thread is on the drain plug? I want to order a sealing washer, but without pulling the plug I have no idea the size of the threads. Yes the stock washer is most likely in the oil drain pan, from when I changed the oil in the eleven hour before heading to Texas. Loren |
Firemanjim
| Posted on Tuesday, August 10, 2010 - 02:08 am: |
|
Stock gasket was terrible,local auto parts store will have good nylon ones. |
Gowindward
| Posted on Tuesday, August 10, 2010 - 03:29 pm: |
|
Thanks to Roger (Easy_Rider) the S2 oil drain plug 1/2"-20. I picked up a auto type drain plug seal/washer so hope that solves it. Now to pull the plug and get the seal in place and the plug back in without draining all the oil. (Message edited by gowindward on August 10, 2010) |
Ebutch
| Posted on Tuesday, August 10, 2010 - 10:30 pm: |
|
Good infoe Men.Thanks! Ben using alum washers , not really good. |
|