Author |
Message |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Jim_williams
| Posted on Sunday, June 27, 2010 - 02:43 pm: |
|
maybe this has been done to death, but is this something that breaks often, and if so is it covered under warranty? In the last month, I now have a headlight that doesn't work and a broken exhaust strap. Hopefully, both are warranty?.. This is an 09 XP. Thanks! |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Tootal
| Posted on Sunday, June 27, 2010 - 03:48 pm: |
|
I would say they will be covered. I wouldn't ride it with the broken strap though, might cause a cracked pipe, or broken stud in the head. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Paralegalpete
| Posted on Sunday, June 27, 2010 - 04:57 pm: |
|
Jim, mine was and they also replaced the two rear straps and the muffler clamp. I think my front strap broke because previously I had lost the front strap mount bolt and nut (if that makes sense) I noticed the missing fastener and replaced it. A few weeks later the strap broke (Message edited by paralegalpete on June 27, 2010) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Jim_williams
| Posted on Monday, June 28, 2010 - 08:45 am: |
|
pete, did you ride the bike with the broken strap? I hate having a bike in the garage I can't ride![](http://www.badweatherbikers.com/buell/clipart/beater.gif) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Union_man
| Posted on Monday, June 28, 2010 - 09:05 am: |
|
Jim_williams I broke a front strap in the middle of nowhere. I drove the bike 5 miles or so into a small town with a hardware store. I found some large "hose clamps" and I was on my way. I used 2 of them because they didn't look a strong as the original strap. I continued on the trip, and rode for about a week after until I could get a proper front strap. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Paralegalpete
| Posted on Monday, June 28, 2010 - 04:20 pm: |
|
I did limp it home, and a local uly rider sold me his spare clamp which I installed until the warranty parts became available. I also now carry the two worm clamps as noted in the previous post. I would not ride it without the front clamp as I now know you could snap the header bolt |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Jim_williams
| Posted on Saturday, July 03, 2010 - 08:01 am: |
|
Got the new strap finally, BUT do I really need to pull the muffler to gain access to replace the strap? Seems kinda ridiculous?! What am I missing?? |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Paralegalpete
| Posted on Saturday, July 03, 2010 - 08:52 am: |
|
Yes you do. I just loosened the rear straps (you can reuse those) and then removed the front muffler mount fastener (screw and bolt) that will allow you do get the clamp on the front mount. Do you have a service manual? There is a specific torque sequence to the re tightning process. As well you are not supposed to re use the torca clamp that fastens the muff to the expaust pipe |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Jim_williams
| Posted on Saturday, July 03, 2010 - 09:12 am: |
|
bummer. I have scheduled service for another warranty item Tues. I'll just leave it and let the dealer take it apart since I don't have another front torca clamp. I do have the service manual and saw the steps. I was just hoping there was a non approved work around![](http://www.badweatherbikers.com/buell/clipart/biggrin3d.gif) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Bzrider
| Posted on Saturday, July 03, 2010 - 11:25 am: |
|
MINE BROKE THIS MORNING WHAT ELSE COULD BREAK IVE HAD WHEEL BEARINGS CHANGED STSTOR ,REG,HEAD BEARINGS.2 COMPLETE ENGINES CASE LATCHES .INTAKE SEALS ,ANYTHING ELSE ???/ |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Dirt
| Posted on Saturday, July 03, 2010 - 11:50 am: |
|
Well if it is anything like mine, you are probably coming up on a Throttle Body and or Speedometer failure. I can't seem to catch a break. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Buellerxt
| Posted on Saturday, July 03, 2010 - 01:00 pm: |
|
What causes the front exhaust strap to fail, and so soon? Thanks. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Jim_williams
| Posted on Saturday, July 03, 2010 - 02:43 pm: |
|
Bueller XT, I have no idea. My bike only has about 6500 miles on it. I looked down last week, and noticed it hanging there. Honestly, I don't know how long it's been broken. The stud snapped just before the nut. Maybe, it was tightened too much at factory??? |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Paralegalpete
| Posted on Saturday, July 03, 2010 - 03:41 pm: |
|
I would say to start off that its a poor design, to much pressure for that one clamp. Should be two on the front as well as the rear. Theres a lot of force placed on that one clamp. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Blk_uly
| Posted on Saturday, July 03, 2010 - 07:36 pm: |
|
the front muffler strap is only ment to be tourqued one time after that it must be replaced. as per service manual |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Redbuell_really_gives_you_wings
| Posted on Saturday, July 03, 2010 - 08:31 pm: |
|
hmm ive re-fitted my front clamp about 5 times now, maybe i should keep an eye on it. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Dio
| Posted on Saturday, July 03, 2010 - 10:35 pm: |
|
Is there enough real estate there to allow a hose clamp alongside the original clamp as a sort of back-up to share the load? |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Reepicheep
| Posted on Monday, July 05, 2010 - 11:13 am: |
|
Not without a new bracket, which would be a complicated bit of design and fabrication. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Ronmold
| Posted on Monday, July 05, 2010 - 12:34 pm: |
|
What part generally breaks, the bolt or the band itself? |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Electraglider_1997
| Posted on Monday, July 05, 2010 - 02:00 pm: |
|
Just wondering if a Stainless Steel cable tie would work for this application. You can get them of various widths and lengths and they are rated very strong. http://www.elecdirect.com/catalog/b98773df-2a18-4a8e-a84e-e01ab143144b.aspx (Message edited by electraglider_1997 on July 05, 2010) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Reepicheep
| Posted on Monday, July 05, 2010 - 03:06 pm: |
|
Mine broke at the band. "Very Strong" probably isn't strong enough... Those stock torca clamps (the thick ones) will happily crush the stock can before failing... Though you could probably get several of those straps through there, so maybe with enough of them it could work (though it might look a little mickey mouse). |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Union_man
| Posted on Tuesday, July 06, 2010 - 05:46 pm: |
|
Ronmold Mine was the strap itself. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Jim_williams
| Posted on Tuesday, July 06, 2010 - 08:25 pm: |
|
the bolt on mine broke..It's a really bad design. I suppose it'd be one thing if they use a cheap flimsy bracket. It's only an $11 part. No biggie, but they should've made it easily swapped. (Message edited by jim_williams on July 06, 2010) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Paint_shaker
| Posted on Friday, July 09, 2010 - 08:25 pm: |
|
Here is a pic of a solution we are using on the race bike.
![](http://www.badweatherbikers.com/buell/messages/142838/579210.jpg)
|
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Paint_shaker
| Posted on Friday, July 09, 2010 - 08:26 pm: |
|
Some more...
![](http://www.badweatherbikers.com/buell/messages/142838/579214.jpg)
![](http://www.badweatherbikers.com/buell/messages/142838/579215.jpg)
|
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Paint_shaker
| Posted on Friday, July 09, 2010 - 08:27 pm: |
|
One more...
![](http://www.badweatherbikers.com/buell/messages/142838/579218.jpg)
|
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Paint_shaker
| Posted on Friday, July 09, 2010 - 08:28 pm: |
|
We may incorporate a second spring next to the first one to help keep more tension. |