G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Ray_r Posted on Sunday, June 20, 2010 - 09:46 pm:        I've got a 2009 12X. I've installed the Erik Buell Racing race ECM with the Drummer calibration. I had to have my wife hold my front nut. I've installed a K&N filter. I've got the stock muffler and cable removed. I've done the TPS reset procedure (twist the grip 3 times). I've installed the Tuono mirrors. Now I'm just waiting for the Drummer SS to arrive. Patience, Ray. Patience. For those of you who have done the same, what are your impressions? I had already installed the comfort kit, but never had the stock ECM changed.   Idaho_buelly Posted on Monday, June 21, 2010 - 12:14 am:        I have 09X w/a K&N,Drummer,Erik Buell Racing ECM..I've had it now for about 1,000 miles,I think it runs great,it still has some minor surging around 3,000rpms,and a minor flat area around 4,500rpms,but I noticed that goes away when the ecm has done a learn..I like it and feel it's worth the money..No decel popping either..Happy trails!!....Tim   2008xb12scg Posted on Monday, June 21, 2010 - 09:52 am:        shouldn't you do the tps reset after you instal the muffler?   Tootal Posted on Monday, June 21, 2010 - 10:11 am:        TPS is just setting a physical zero in sync with an electrical zero. The muffler will have no effect on that.   Ray_r Posted on Monday, June 21, 2010 - 10:45 am:        Idaho - Did you get the Erik Buell Racing ECM tuned specifically for the Drummer? Or were you an early adopter and got the standard race ECM?   Idaho_buelly Posted on Monday, June 21, 2010 - 07:10 pm:        They claimed it was tuned for the Drummer..I think it says that on the website also..   Ray_r Posted on Thursday, July 22, 2010 - 12:26 am:        I finally received the Drummer SS muffler today. I also bought the chin spoiler kit. While mounting the kit, I noticed the left bracket has two holes that mount under the side stand. But my side stand has three bolts. So if I mount it this way, the 3rd bolt will have a gap between the side stand frame and the bike frame. That can't be ok. I think it needs some sort of spacer to fill that area. Has anyone else run into this? If so, what was your solution? I sent a note to Kevin to get his input as well. Of course, the muffler didn't come with instructions that I could find in the box. So I went ahead and mounted the muffler. When I ran into this issue, I went online and found mounting instructions on the KDFab website that said to mount the bracket before the muffler. Grrrr. But that still leaves the issue of the 2 bolt bracket and the 3 bolt side stand.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: