Author |
Message |
Russmannnn
| Posted on Wednesday, June 16, 2010 - 02:45 pm: |
|
Pick this bad boy up at harbor freight for bout $30.00 on sale. Works fine
|
03fatboy
| Posted on Wednesday, June 16, 2010 - 03:08 pm: |
|
Do you have spools drilled in or does it just lift off the swing arm? |
Russmannnn
| Posted on Wednesday, June 16, 2010 - 03:21 pm: |
|
Lifts off the swing arm no spools. I need to put something of the lifts tho because it put a small mark on the right side of the swing arm. Its not huge but it is a small nick. |
Jrfitzny
| Posted on Wednesday, June 16, 2010 - 03:42 pm: |
|
They have it in stock at the stores or did you purchase it online? |
Jornum1
| Posted on Wednesday, June 16, 2010 - 04:12 pm: |
|
You need to watch out, as people with that style lift have reported the bike sliding off due to the angle of the swing arm. I have seen them in stock at the HF near me. |
Russmannnn
| Posted on Wednesday, June 16, 2010 - 06:49 pm: |
|
Ill have to keep that in mind never really thought bout that. I got mine the store but it was the last one that they had. |
Scottorious
| Posted on Wednesday, June 16, 2010 - 06:59 pm: |
|
Ive got that also, just got it last week but it has been on the stand since then and hasnt slipped off...I wrapped a rag really tight on the part that touches the swing arm and then wrapped it tightly in duct tape. No scratches with that. I also thought it would slip, I then tried to make it slip and pushed it and wiggled it and it never slipped. |
01lightning
| Posted on Wednesday, June 16, 2010 - 08:00 pm: |
|
TAKE THOSE PIECES OF CRAP BACK. If I had not been RIGHT NEXT to my bike when it was up on that thing my CR woulda got slammed. Oh I know, it looks fine hell I bought one BUT ya get whatcha pay for and believe me you'll feel silly for putting your baby up there on some low budget high production jap crap if it fails. This aint a slam on anyone. DO NOT USE. The wheel collapsed. The part where the axle goes thru separated from the wheel body. It happens fast. Mine lasted oh about 3 minutes. |
Duff24
| Posted on Thursday, June 17, 2010 - 01:28 pm: |
|
I took an old fiddy inner tube and cut a piece about 4 inches long and slid it over the swingarm holders...... |
Xnoahx
| Posted on Thursday, June 17, 2010 - 03:58 pm: |
|
awesome, $30 works for me |
01lightning
| Posted on Thursday, June 17, 2010 - 06:51 pm: |
|
....fair warning
|
Jrfitzny
| Posted on Thursday, June 17, 2010 - 06:55 pm: |
|
so if you put some better wheels on, it will be fine. |
Boogiman1981
| Posted on Sunday, June 20, 2010 - 01:31 am: |
|
made in china not japan dont be such a racist |
01lightning
| Posted on Sunday, June 20, 2010 - 06:32 am: |
|
ya know what? use em...use em all day long; I tried. |