| Author | Message | ||
     Jayz |
http://cgi.ebay.com/ebaymotors/Buell-1125-R-CR-4-O il-Filters-2-Seal-Kits-NEW-_W0QQcmdZViewItemQQhash Zitem2307c2d9b3QQitemZ150454065587QQptZMotorcycles Q5fPartsQ5fAccessories Just looking for some feedback. | ||
| Hogzilla |
I do. They work just fine. | ||
| Dannybuell |
Yes they work fine. | ||
| Jayz |
Thanks. I'll pick some up... | ||
| Xband |
I think they work. I put almost 7k miles on them. I will have a better idea after I hear what has been wrong with my CR. I am (sorta) vouching for the HiFlo not the particular seller. | ||
| Thejuicer |
It lists the filter part numbers, but does anyone know the number to the seal kit??? | ||
| Thefleshrocket |
I bought a pair from him originally. When I went back for another set, the price had gone up and I'd found another vendor that was a few bucks cheaper. If you email this guy directly and ask to buy outside of eBay, that may save you a dollar or two. Hiflo filters work fine. I'm on my third one and my first two oil analysises came back good. | ||
| Type911 |
used em in my TL1000R and in my 1125R No problems. | ||
| Bobby_fletcher |
I was actually able to go to my local ya-mee-haw dealer, and they stocked the high flo filters. They were about the same price, with no shipping wait involved. | ||
| Stirz007 |
Juicer - there have been quite a few threads about sources for the Hiflo filters and seals. Do a search and ye shall be rewarded. | ||
| Pittsburgh_guy |
Bought a set from this guy yesterday. 2 filters and 1 seal. 30 bucks delivered. I went to the stealerships around this area(Non HD/Buell) They wanted like 18 for the filter. So I didn't think 30 was bad at all. | ||
| Hogzilla |
Here is a link to the cross reference from the FAQ section of BadWeb... http://www.badweatherbikers.com/buell/messages/290431/549656.html?1270701781 I reused my o-rings and washers and have had no issues. Unless there is damage you should be ok to reuse them once or twice. (Message edited by hogzilla on June 16, 2010) (Message edited by hogzilla on June 16, 2010) | ||
| Aj2010 |
I am using them as well. So far just one oil change and a little over 3000 KMs. So far so good  | ||
| Xband |
O rings- I bought 50 of them from Marco Rubber. 2-141 buna-n. At that rate I change them every time. | ||
| Rsh |
That is the same part number (HF564) as the updated Aprilia long filter which uses the extended filter housing. The Can Am Spyder also uses the same filter. | ||
| Fireboltxb9r |
Why not just use the OEM Buell filter? My dealer sells them for $20.00 even. | ||
| Freight_dog |
http://www.powersportsuperstore.com/HiFlo-Oil-Filt er-HF564-p/tr14-0564.htm No they are not a sponsor, but it would be a disservice to my Buell Brothers to not direct them to the best oil filter deal going. The Hi-Flo is the same filter as stock IIRC or at least looked identical when I compared them at my first oil change. Way cheaper. You just need to buy some inexpensive o-rings from McMaster-Carr, do a search for the size, I cannot remember off hand. I got 50 of them for a few bucks. 2800 miles and three oil changes, no problems. Order 4 of these at a time to save on shipping. I am down to my last filter. Another order coming soon. | ||
| Datsaxman |
Thanks for the link, Dog! | ||
| 09_1125r |
Yeah thanks for the link dog. Just ordered 4 filters at that price. Thanks for the O ring info Xband. |
