G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Buell Forum » Knowledge Vault (tech, parts, apparel, & accessories topics) » Troubleshooting (Poor Starting/Running/Handling/Ride Issues) » Archive through August 12, 2010 » 00 x1 computer

« Previous Next »

Author Message   Louiedog996 Posted on Saturday, June 12, 2010 - 12:05 pm:        i just installed a new aircleaner and d n d slip on ,do i need to do anything with the computer,it doesnt say race only on it   Jramsey Posted on Sunday, June 13, 2010 - 12:22 pm:        Just ride it,keep it in closed loop 3000rpm or above for 10 minutes so the ecm can learn the new additions. If you want to boost the performance even more get the race ecm or install the map from one.   Kalali Posted on Monday, June 14, 2010 - 11:34 am:        If your "new" air cleaner is a high flow type like K&N, then the combination of the exhaust and the air cleaner will cause the engine to run lean. At least mine did. You can check your AFV and see if in the acceptable range (95-110). If you see anything higher than 110 then you'll be much better off to load Race maps onto your stock ECM.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: