Author |
Message |
Matrim
| Posted on Tuesday, June 08, 2010 - 03:19 pm: |
|
I was searching for info on replacing my battery and within the multitude of different opinions, I came across a post from 2008 talking about using Dewalt battery packs to make custom bike batteries. I was wondering if anyone had any additional information or if anyone has actually done it themselves and would like to shed some light on this mod (because naturally I am very intrigued.) Would I be correct in assuming that an altered charging setup would be required? If so, any thoughts? Another thought... Best "normal" battery? (Value in mind.) Thanks for reading, Kevin |
Buellistic
| Posted on Tuesday, June 08, 2010 - 03:33 pm: |
|
Look for a "BATTERY PLUS" Store in your area ... |
Firstbuell
| Posted on Tuesday, June 08, 2010 - 05:19 pm: |
|
best 'normal' battery is the H-D OEM piece I've put 2 so-called 'highest-quality' Yuasa units in my '99 M2 - both failed in less than 6 months, torn apart by the "raw powah of the M2" !! H-D really did get the battery [at least!] correct the 1st time....... |
Sloppy
| Posted on Wednesday, June 09, 2010 - 01:32 am: |
|
Best value is a HD battery. 12 years on the bike and I've only replaced the battery ONCE! Yes, it's VERY hard to beat the HD battery... |
Kyrocket
| Posted on Wednesday, June 09, 2010 - 09:42 am: |
|
Check around, the oem is a very good battery and it was $8 cheaper at HD than at Walmart if you can believe that. |
Preybird1
| Posted on Wednesday, June 09, 2010 - 10:04 am: |
|
I got an interstate battery for my bike for $78.00 HD wanted $117.00 for theres. |
Matrim
| Posted on Wednesday, June 09, 2010 - 03:55 pm: |
|
Thanks a lot for your input. Sounds like the HD battery is the ways to go. Just curious, How many cranking amps does the X1 need to start? <terminology> |
Sloppy
| Posted on Wednesday, June 09, 2010 - 08:46 pm: |
|
Prey - was the Interstate an AGM (no fill holes) or Lead Acid (with fill holes)? Thx. |
Natexlh1000
| Posted on Wednesday, June 09, 2010 - 10:07 pm: |
|
Weird. My H-D wanted under $80 for mine the last time I needed one. Just find a AGM that fits the hole and you will be fine. |
|