Author |
Message |
3vil_twin
| Posted on Thursday, June 03, 2010 - 05:26 am: |
|
Hi All I want to remove the rear footpegs and hangers from my 1125CR but am looking for advice on what to do with the petrol overflow pipe that is routed down the inside of the left hand hanger. Help |
Ratbuell
| Posted on Thursday, June 03, 2010 - 07:14 am: |
|
I took the peg brackets off, and reinstalled the left front mounting bolt until the head was about 1/4" out of the frame, leaving a "notch" between frame and bolt head. I routed the vent tube to that notch and zip tied it in place, and shortened it so it sticks out to the side enough not to drip on the swingarm. |
Boogiman1981
| Posted on Thursday, June 03, 2010 - 11:07 am: |
|
cali kit? |
Cravacor
| Posted on Thursday, June 03, 2010 - 11:11 am: |
|
Cali Kit. |
Dirty_john
| Posted on Thursday, June 03, 2010 - 12:36 pm: |
|
Is this the same post as on UKBEG? I extended the vent tube to the licence plate and arranged it so as not to drip on the rear tyre or the belt. |
Gofastalot99
| Posted on Thursday, June 03, 2010 - 01:20 pm: |
|
I took the rear pegs off and rerouted the hose through the right side under the seat and frame, then down across the rear cylinder head, forward of the clutch cover, and then zip tied to the cable end. I'd show a picture but I'm away from my bike at the moment. Most of the hose is hard plastic so just be careful not to break it, but amazingly its formed almost exactly as needed to relocate it this way. |
Ezblast
| Posted on Thursday, June 03, 2010 - 02:59 pm: |
|
I guess mine was already rerouted - never saw it hanging there, so didn't even rethink it. EZ |
3vil_twin
| Posted on Friday, June 04, 2010 - 10:07 am: |
|
whats a Cali Kit ? |
Kirb
| Posted on Friday, June 04, 2010 - 10:54 am: |
|
cali kit- you can search, but it is basicly a carbon canister that fits under the seat. Some have been lucky to complain about fuel leaks on the floor and having Buell install the can free of charge. |
|