| Author | Message | ||
     Isiahstites |
T-storm heads with NRHS stage 3 port work and more.......please see invoice for details. If I were going to these heads back into operation the center plugs (dual plug heads) would get time certs as a few threads are missing on one of them. The plug comes in and out with no problems. Today I also noticed one of the valve guides was cracked at the bottom, so new valve guides should be installed. Overall these heads are really good with the exception of the two things stated. My bike made over 130 hp with these heads and the bike went 173mph at Bonneville. A used set of heads cost X and the work I had done is about a grand so I am asking $900 you pay the shipping.        Invoices   Five speed trans out of a S3, works great! $300 you pay shipping   Redshift 643 cams $275 shipped   S&S Super D air cleaner $100 shipped  Paughco oil tank $50 shipped  Stator and regulator make offer  S3 Front end she isn't pretty but she is in good working condition. Both triple trees and all bolts were drilled for safety wire as well as steering dampeners. Make offer     Frame make offer  (Message edited by isiahstites on May 22, 2010) | ||
| Greg_e |
Never mind, I see you edited for prices. (Message edited by Greg_E on May 22, 2010) | ||
| Easy_rider |
Likewise.... (Message edited by Easy_rider on May 22, 2010) | ||
| Isiahstites |
Easyrider - PM replied Greg e is $275 shipped for the cams to much? I think I paid over $450 for them. | ||
| Greg_e |
More than I can go, but not really out of normal, I posted because it almost looked like you were going to basically give them away and if that was the case and they worked in my XB9 motor, then I was game. If you decide to lower the price, let me know but I think you are offering at a fair price if they are in good shape. Since the valves have special springs and retainers (etc.) you might consider selling cams and heads as a set. Also it looks like you need to specify if these were on donor gear cores or their new cores. They mention that on donor cores the #2 cam gets welded to the gear, on new cores they use a key to keep it from rotating and changing the timing. Might make a difference to someone. | ||
| Isiahstites |
If someone is interested I will sell them as a set. These we were my donor cams. | ||
| Slc4me |
I would like to know the price for the forks tranny and cams | ||
| Isiahstites |
Price for the trans and cams is listed, if you want all three make an offer to include shipping to your location. | ||
| Grounder |
please email me about the top end. dynellep@live.com. would like to talk to you about them. | ||
| Dmac |
could use some info about the frame. | ||
| Slc4me |
450 shipped for the trans and forks? | ||
| Isiahstites |
Trans is sold.......make an offer on the forks. | ||
| Slc4me |
140 shipped? | ||
| Down_on_my_stimulus |
did grounder get the heads? | ||
| Isiahstites |
Heads and cams are sold. |
