| Author | Message | ||
     Swamp2 |
Anybody else have trouble getting into the setup menu? I turn the key on - hold the toggle and mode keys for 5+ seconds - most of the time, nothing. I just tried it at least 20 times in the garage, and got in once. The Mode & Toggle keys work fine individually. I get into diag mode if I push them both and then turn the key on... WTF??? | ||
| Mtch |
do you wait for the display to run through its initial start up or whatever its called? once 'CT COLD' is flashing you should be able to get into setup menu by holding both keys for 5 seconds | ||
| Swamp2 |
Well, yeah I was. I found I could get in ok if the bike was running, so it must be hyper-sensitive to battery voltage or something. But I even had a battery tender hooked up and it wouldn't work reliably. I am wondering if the battery might be a little marginal. Even after I'm out running around on it, when I get home it and put it back on the tender - it's hours before the tender indicates it isn't having to charge anymore. | ||
| 1125rcya |
I hold the toggle and mode before I turn the key! |
