Author |
Message |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Greg_e
| Posted on Saturday, May 15, 2010 - 01:24 pm: |
|
I just wanted to ask before going to the store and buying some fuel line. Is the correct size 3/8 for the connection to the PCV valve to eliminate the molded stock hoses? Is there a specific outside diameter that I should try to hit to close off the airbox? I'm probably going to use the U shaped hose to plug the airbox as opposed to some sort of plug, seems the best way to do this to me. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Terrys1980
| Posted on Saturday, May 15, 2010 - 01:42 pm: |
|
3/8" is the correct size and the standard fuel hose should be big enough to plug the holes. I used sensor friendly black RTV sealant to fill the holes. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Glitch
| Posted on Saturday, May 15, 2010 - 02:03 pm: |
|
I'm probably going to use the U shaped hose to plug the airbox as opposed to some sort of plug, seems the best way to do this to me. I think what you're saying is what I did. I used one of the original vent hoses and just made an upside down U, to plug the holes in the air box. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Fast1075
| Posted on Saturday, May 15, 2010 - 02:20 pm: |
|
+ 2 on the upside down "U". |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Greg_e
| Posted on Saturday, May 15, 2010 - 02:45 pm: |
|
I am still undecided on plugging the holes. An extra chunk of tubing in the holes is about the most simple way of doing it. I also thought about filling each hole with RTV. Ultimately I won't decide until I actually do it. Need to wait until me catch can arrives before I go buy hose and T or Y connector to make sure it doesn't have a different size connector on it. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Glitch
| Posted on Saturday, May 15, 2010 - 02:50 pm: |
|
Need to wait until me catch can arrives Which one did you get? Some come with all you need. Mine did, I got the Drummer kit. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Greg_e
| Posted on Saturday, May 15, 2010 - 03:22 pm: |
|
I bought a generic can because I don't want to spend that much money right now. Not going to be as elegant as the Drummer, but will work and be way cheaper, around $25 with shipping and all I need is the hose and an outlet filter of some sort. http://www.pegasusautoracing.com/productdetails.as p?RecID=4703 It says it will take 1/4 to 5/16 hose, but I'll probably wait until it gets here next week. It shipped on Friday. Also need to make some sort of saddle mount for it, probably strap it to the V bracket next to the oil cooler. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Terrys1980
| Posted on Saturday, May 15, 2010 - 04:17 pm: |
|
Is there any advantage to having a catch can? I just have the hose ran down even with the bottom of the chin fairing with a bolt screwed into it. I figured that could hold a few ounces of oil if it didn't leak past the bolt. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Greg_e
| Posted on Saturday, May 15, 2010 - 04:29 pm: |
|
If the end of the hose is sealed (the screw) then the gasses and other goop will never get out of the engine. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Terrys1980
| Posted on Saturday, May 15, 2010 - 04:43 pm: |
|
I have a breather filter teed off by the oil cooler. Just curious if the can is really needed. I do pull the bolt out every couple months or so. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Greg_e
| Posted on Saturday, May 15, 2010 - 04:56 pm: |
|
A lot of people just run a breather, kind of depends how much stuff you expect to come out. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Glitch
| Posted on Saturday, May 15, 2010 - 05:48 pm: |
|
That's a nice one Greg. Wow! Damn good price on it too. If I hadn't got mine from Mike Norris (mine doesn't have the Drummer logo) I'd probably just have a film can and a filter. He made my timing cover also. Great guy, too bad he doesn't come round here any longer. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Greg_e
| Posted on Saturday, May 15, 2010 - 07:27 pm: |
|
Well the design of that other can is nice, especially since it looks like it belongs. The one I bought will always look like an add on that I jammed on the bike. |