| Author | Message | ||
     Bzrider |
has anyone noticed that the hose clamp for the rear brake fluid supply hose at the mastercylinder will barely contact the outside edge of the belt as is flexes and the suspension compresses i rotated the clamp out of the way after noticeing clean fiber on the belt edge after a hard ride might be worth checking out if the bike is static the clamp wont even look like it could hit but hard excell or large loads or bumps the clamp tabs seem to hit barely but enough to poss damage the belt | ||
| Badrap |
Thanks for the tip. | ||
| Pso |
Bzrider-New one to me thanks, will check it out. |
