| Author | Message | ||
     Impala |
D&D slip on muffler and elbow from my X1. Fits any tuber with the 2.5" outlet. Used 1 season. No dents. $200 Stock header from my X1 $20. Header is cracked by the O2 bung. Updated style shifter from 02 X1. Complete except mounting hardware. Small dent in bottom. Not bent or damaged otherwise $60    | ||
| The4ork |
wil that muffler fit on a s1? | ||
| Nallac |
whats required in the way of mounting hardware for the shifter?. Could use it+your header.. | ||
| Impala |
The long mounting bolt can be found at the hardware store. There is a metal bushing that you would have to fab, find at a hardware store or purchase from harley. There is also a plastic insert for the mount. If you were running the lower chin fairing there is an additional bushing you would need. | ||
| Kalali |
I think among all the required HW, the insert/sleeve piece that fits inside the lever pivot will be the hardest to find/fabricate mainly because it is a precision fit piece. Other pieces should be easier to find/make. | ||
| Brinnutz |
Al sells some iirc. Yup, sure does. http://www.americansportbike.com/shoponline/ccp0-p rodshow/5554.html |
