G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Tenn10 Posted on Wednesday, April 28, 2010 - 06:00 pm:        2009 Uly. Recently installed the comfort kit. I have held off having the new version ECM flash done as I have heard it cannot be undone. Can EcmRead be used to save the older version before having the ECM flashed with the new version? Then, if I don't like the new version could the older one be reinstalled using EcmRead? It seems that the two versions could also be compared directly using TunerPro. Does anyone have any experience with this? Thanks   Froggy Posted on Wednesday, April 28, 2010 - 06:19 pm:        If the firmware version is unchanged you would be able to go back and forth, but there is no reason too as the latest flash is fantastic.   Jetjock Posted on Wednesday, April 28, 2010 - 07:39 pm:        I installed mine without the new flash initially. Did the reflash & it runs better so far with the new flash (only about 500 miles so far)   Blackdog Posted on Wednesday, April 28, 2010 - 11:20 pm:        I had mine reflashed. No regrets.   Redbuell_really_gives_you_wings Posted on Thursday, April 29, 2010 - 03:31 am:        I installed mine without the new flash initially. Did the reflash & it runs better so far with the new flash (only about 500 miles so far) Does it change timing and or fuel as well as the fan logic?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: