| Author | Message | ||
     Isiahstites |
Hey guys I am parting out my LSR Buell that I built a few years ago........if there is any interest in any of the parts let me know. The whole bike is going to be parted out, everything goes. Almost all motor parts came from Dan at NRHS. I have receipts to prove as well. If this is not the right section or out of policy for the forum please let me know and I will delete, move or abide by the rules. I will see if I can find the thread with pics of the build I posted here on the this site. All parts from case and carrillos to hydro solid lifters. Thanks Scott | ||
| Isiahstites |
I will some pics of the bike up once it tore down. The bike went 172 mph at Bonneville with more in it.........we were thinking with the right tune it had a 180 mph pass in here. She made 128 or 129 horse at the wheel with minimal tuning. We were thinking a good tune would of yielded low 130's in horse power. Scott | ||
| Cyclonemick |
Pic's would be great! | ||
| Phelan |
I can vouch for a BA bike. You'll need to post this in the classifieds section though, Isiah. | ||
| Isiahstites |
They are on there way I just put the bike on the lift and am ready to tear into her. There are a lot of good parts here. I am going to part the motor completely. Stage 3 NRHS Thunderstorm heads.....S&S roller rockers, Red Shift 643's..... | ||
| Dinuns1 |
pm sent | ||
| Isiahstites |
Pm replied | ||
| Brinnutz |
I sent you one as well... | ||
| Isiahstites |
Here are some specs on the motor and some of the parts I have available.   This is the bike this morning as an entire bike. Every part is for sale. She is really dirty from El Mirage.    I need to clean the parts up and check everything out........pics hopefully by the end of the week..........if not pics will be up by Friday afternoon for sure.   | ||
| Phelan |
How big is the bore? | ||
| Isiahstites |
3.700 | ||
| Phelan |
Doh, I just saw that. Would that require case boring? I read you thread on XLF back in the day, but I forget. | ||
| Isiahstites |
Yes, the cases are bored. | ||
| Duceater |
pm sent. | ||
| Isiahstites |
Ok here is an update... SS roller rockers w/shafts are sold Push rod tubes and base are payment pending Cases w/fly wheels and Carrillo's are payment pending Still have lots of parts to go and I will try to get pics up soon S3 Front end Front wheel Brand new never seen asphalt tires with all the nipples Stage 3 T-storm heads Frame with title Custom chassis Starter Jims hydro solids 643 red shift cams Adjustable pushrods SS super G carb with T-Jet and some other custom work And much more Oh dyna dual tower coils with dyna ignition I think its a 4000i but need to check | ||
| Isiahstites |
Starter, carb, ignition, primary cover, cam cover, all primary internals, exhaust sold. | ||
| Basti |
Hi I would be interested in the handle bars , do you still have them ? If so they are for HD controls means 1"? Thanks in advance Basti | ||
| Phelan |
What kind of tires are they? | ||
| Isiahstites |
Tires are Dunlop Sportmax I think 202 model. Currently pending sale | ||
| Phelan |
I see. That's cool. I never was a Dunlop fan myself, but they do theIr job. | ||
| Isiahstites |
For cornering I am sure there are lots of better tires. I bought these because they are a harder compound which would lead to less chance of the tire chunking at high speed. | ||
| Flatheadbill |
PM sent on heads. | ||
| Isiahstites |
Replied on the heads. | ||
| Dmac |
Sent pm | ||
| Isiahstites |
I think I have replied to all of the PM's if I have not please hit me up again. I have been really busy shipping parts and taking calls and emails. Here is pretty much what I have left. Front end Triple trees front wheel custom chassis and the following pictures..... S&S air cleaner for D carb I paid $250 new $125 shipped  Paugho oil tank $150 new.......$75 shipped  Stator and I have a regulator..........make offer in good working condition  Adjustable push rods..........SOLD} Jims hydro-solid lifters I paid $280 new $140 shipped  643 redshift cams.......$450 new.........$300 shipped   5 speed trans $325 you pay the shipping   $1000 you pay shipping T-storm heads with stage 3 port work, titanium .700 lift retainers, 1.940 intake, 1.615 exhaust, 700 lift springs, were set up for 3.700 bore with 30 degree pistons, dual plug Heads still have El Mirage dirt on them from racing......they are in good working order and will clean up nicely. If I was going to run these heads again the center spark plug hole would get time certs as a few threads are missing, however no problem in or out with plugs. Heads also come with rocker boxes minus the rockers. My rocker boxes are already clearanced for the big valve springs so they go with the heads.   (Message edited by isiahstites on April 28, 2010) (Message edited by isiahstites on April 28, 2010) (Message edited by isiahstites on April 28, 2010) | ||
| Isiahstites |
.... (Message edited by isiahstites on April 28, 2010) | ||
| Brinnutz |
Emailed you on the pushrods. | ||
| Jimmyjammoto |
PM Sent on forks | ||
| Isiahstites |
Pushrods tubes and bases are now available as the previous deal fell through. | ||
| Flatheadbill |
Pass on the heads. Thanks | ||
| Mhartiga |
Just replaced my front cylinder head on 2000 buell x1. Got it running and realized i Cut the Lower Push rod gasket. Do not want to take this thing back apart. I know a rooky mistake. Anyway I could really use the Collapisable push rod cover kit. If you still have how much do you want? Will pay as fast as you can ship thanks! | ||
| Isiahstites |
PM SENT | ||
| Isiahstites |
Hyrdo-solids sold Billet base and push rod tubes sold |
