Author |
Message |
Boneill
| Posted on Wednesday, April 07, 2010 - 01:04 pm: |
|
I did a search, and came up with some conflicting info. I have a '08 XT that I bought used, with a Jardine. HATE IT!! The sound is okay, but miss the jacking points, and the chin spoiler mounting. I have a line on a take-off "stock" XB muffler, but the shop doesn't know what it came off of. What am I looking for to id it as useable on the Uly? I know that other XB12 mufflers will not mount without sending off to Drummer or Odie (which would be okay with me). It's only $50, and may be worth picking up even as a core. What does everyone think? Thanks for any info. Brad |
Reepicheep
| Posted on Wednesday, April 07, 2010 - 01:14 pm: |
|
That's news to me... I thought all the 12 stock can's were the same, and all the 9 stock cans were the same... but I am not an expert. |
Union_man
| Posted on Wednesday, April 07, 2010 - 01:18 pm: |
|
Xb12 stock mufflers will work on a ULY. The difference is the exhaust exit. It is further back on the Uly because of the longer kickstand. |
Pontlee77
| Posted on Wednesday, April 07, 2010 - 01:36 pm: |
|
the kickstand will hit the tip of any original non Uly exhaust, I put one of a lightning on mine because I liked much more the exit and had to cut a bit of form it as the stand hit it when it was up. |
Ratbuell
| Posted on Wednesday, April 07, 2010 - 01:55 pm: |
|
As noted, all 9 cans are functionally the same, and all 12 cans (with the valve) are functionally the same. The only difference among models is the outlet/tip design. |
Boneill
| Posted on Wednesday, April 07, 2010 - 02:59 pm: |
|
I guess I misunderstood some things. So other than a little trimming on the tip any XB12 muffler will fit? That's good news. |
Ratbuell
| Posted on Wednesday, April 07, 2010 - 06:14 pm: |
|
yep |
Natexlh1000
| Posted on Friday, April 09, 2010 - 12:35 pm: |
|
It's mild steel too. Cut'n paste with a welder. Wheeeee! |
Ulynut
| Posted on Friday, April 09, 2010 - 12:51 pm: |
|
Uly X mufflers are reinforced along the bottom to take the brunt of rocks, and curbs and stuff. |
Mikef5000
| Posted on Friday, April 09, 2010 - 08:43 pm: |
|
Are Uly XT mufflers reinforced the same? |
Froggy
| Posted on Friday, April 09, 2010 - 08:51 pm: |
|
All XB mufflers are reinforced to be used as a jacking point, not as a bash plate. If I took a pipe off an 04 Firebolt and a pipe off an 09 Uly, and then I cut the tip off, you wouldn't be able to tell the difference, because there is none |
Bikelit
| Posted on Friday, April 09, 2010 - 11:33 pm: |
|
Just wanted to add some general info on mufflers. The 9 and 12 cans differ in more than the valve. The 12 actually runs through a smaller diameter pipe than the 9 (when the valve is closed) before it escapes. Both exit at 2". The 9 exits through the far right pipe while the 12 leaves through the center. |
Uly55
| Posted on Monday, May 07, 2012 - 02:31 pm: |
|
I am installing a Jardine muffler and K&N air filter. Do I need to do ECM or fuel mapping on this after I do these mods? |
|