| Author | Message | ||
     Avc8130 |
So for some reason the RIGHT turn signals on my CR have become sporadic. They will function perfectly one momment, and the next neither will flash. The IC shows either normal or increased rate when they aren't flashing. Any suggestions? ac | ||
| Trojan |
My indicators do exactly the same. When I switch them on they light up, then go out, then light up, then go out, then light up, then go out, then light up, then go out, then light up....................  sorry, couldn't resist  | ||
| Avc8130 |
Darnit! You got me all excited. I thought I had a buddy with the same issue, but alas, just a smarta$$. LOL ac | ||
| Avc8130 |
The fault tree in the electrical diagnostic manual seems to lead to a bad IC. Maybe I will try re-marrying the IC to the bike. ac (Message edited by avc8130 on April 09, 2010) | ||
| Chevycummins |
I think I would swap the wires at the turn signals, swap left to right on the rear and see if it operates normally. Also try the same for the front just to make sure its not the turn signal. I'm sure you know there has been a couple of the rear turn signals that have failed. I've had 3 put on my bike. Mine always blinked fast though. | ||
| Avc8130 |
I tried swapping turn signal wires. The right signals themselves function. It appears to be a control issue. ac |
