Author |
Message |
Petethekiller
| Posted on Tuesday, April 06, 2010 - 06:38 pm: |
|
I have a 2009 CR and plan to order a Keda-design RT-3 and a EBR pump gas ECM this weekend. Is there anything I need to know before ordering this part or are there any suggestions that you may pass along based on your experience with your ECM order. I thought I read someplace that some people have had issues with the RACE ECM on a CR and I just want to know what I am getting into. thank you |
Froggy
| Posted on Tuesday, April 06, 2010 - 06:45 pm: |
|
No issues that I am aware of, and I read pretty much every post on here. |
Easyrider
| Posted on Wednesday, April 07, 2010 - 01:12 am: |
|
Petethekiller, be aware that the race ECM has a mapping insite for 1 specific exhaust made. It is not 100% made for that exhaust and that is why it can give you not a 100% satisfaction. |
Court
| Posted on Wednesday, April 07, 2010 - 08:19 am: |
|
tech@ebracing.com No better place in the world for answers. As they say in the Pegasus world . . . "from the horses mouth". |
Bob_thompson
| Posted on Wednesday, April 07, 2010 - 12:42 pm: |
|
Plus one +1 here also Court. They have been my go to people for all my technical questions and even with a short wait, (they are really busy), sometimes its worth it to get it straight "from the horses mouth". They do however usually respond in just a day or so. And they DO know their bikes and engines better then anyone else. Period. Bob |
|