| Author | Message | ||
     Rombi |
Going to be raining a few days so last night I started with the high bar install. All went good except I did not take a picture of the lower air box before I pulled it off and now I am looking at it and wondering where or what goes where. I see a part with a green o-ring on it (like a pcv valve) but I have no idea where to plug it into. Also the square at the back of the lower air box does something sit in there? | ||
| Geforce |
That green O ringed part doesn't connect to anything. If I am not mistaken the O ring side goes down and it just sits there. I believe it to be a pressure sensor. As for the square at the back of the box.... need some detail on this one. All I can tell ya is that the air box is a pretty straight forward removal and installation. | ||
| Ratbuell |
The green o-ring part is a barometric sensor, it just sits there. It's atmosphere-reference for the ECM. | ||
| Tbowdre |
the square hole is likely where the fuel line is supported. it has a matching square that hold onto the lower air box. maybe.....lol! | ||
| Rombi |
I know better than to rush pulling things apart but it was going so smooth that I pulled the lower off before I took a good look. I am sure I will figure it out on install. | ||
| 99buellx1 |
The square hole is where that green thing goes. It kinda clips into it (barely) | ||
| Thefleshrocket |
Oh SURE.. I ask what that sensor is and get a 30-post thread of mostly smart-ass answers, and someone ELSE asks and gets a half dozen helpful replies! http://www.badweatherbikers.com/buell/messages/290 431/551430.html?1270076395  | ||
| Joshinga |
ain't that a bi**h | ||
| Ccryder |
Guess it's all in the way you ask the question, and not in what you asked ;+}. | ||
| Captain_america |
Fleshrocket, haha you got the answer in the first reply... what more could you ask for? |
