G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Drkside79 Posted on Monday, March 29, 2010 - 12:22 pm:        So i bought a Tail chop mod. Which despite hours of effort i am having a problem installing. Among other issues here is the current dilemma there are 6 bolts/screws that hold the piece on two through the bottom and 4 in the frame arms. The two on the bottom are fine. Three of the 4 on the side are fine. However one no matter how hard i push pull beg or swear wont go in straight. I have countered this by buying a new screw albeit longer and adding washers. ti still goes in crooked but it is now very tight. What should i do? Should i leave it as is or just return the part and say screw it. I want to keep it i just want to know if you all think it will hold?   Drkside79 Posted on Monday, March 29, 2010 - 12:28 pm:        Also i would like to thank HD for over torquing the One bolt on the other side and stripping it. My was that a joy to remove.   Blake Posted on Thursday, April 01, 2010 - 07:17 pm:        Magic thread re-appearance.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: