Author |
Message |
Scm2
| Posted on Sunday, March 28, 2010 - 01:01 pm: |
|
I just had my bike repainted and was wondering if their are any products that I can use to help prevent the tank from bubbling. I found a couple of tank sealers but they are not recommended for plastic tanks. Any advice would be greatly appreciated. |
Badsix2
| Posted on Sunday, March 28, 2010 - 01:26 pm: |
|
i'm getting ready to paint my s1 tank and would also like to seal the inside if theirs something that will work. |
Mr_wizard
| Posted on Sunday, March 28, 2010 - 09:24 pm: |
|
beleive it or not the way to seal them is with the primer. I am getting mine repainted and the primer that my paint guy used is a epoxy based primer that is made just for plastic gas tanks to prevent the paint from bubbling. He did some research and house of color had this stuff and said that this was the stuff to use. That and make shure that the vent tube doesn't ever get plugged up. |
Rjn
| Posted on Monday, March 29, 2010 - 02:15 am: |
|
just look in the M2 section : media blasting gas tank thread. |
|