G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Sstlouisjak Posted on Sunday, March 28, 2010 - 08:56 pm:        I need to remove my starter . I was wondering if anyone knew what size the two starter mounting bolts are inside the primary? I need to get a set of ball end hex drivers, I want to get the right size. The book don't say if they are metric or what size they are. I want to have everything lined out before I open her up. Thanks   Jim2 Posted on Monday, March 29, 2010 - 01:03 am:        I sure it was either 5/16" or 1/4", I think it was the larger 5/16". You do want to have a ball-end so you can tilt it a little to clear the clutch gear that is very close to one starter bolt. Mine is a 00' M2, I don't know if they are the same but I would think so. (Message edited by jim2 on March 29, 2010)   Bluzm2 Posted on Monday, March 29, 2010 - 02:05 pm:        They are the same size year to year, just pop the $20 for a full set and be done with it.. You will use most of them anyway.   Sstlouisjak Posted on Monday, March 29, 2010 - 08:51 pm:        Wow Thanks guys...I agree with you Bluzm2.. I think I'll go for both the metric and standard set... Thank You both very much for the info

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: