| Author | Message | ||
     Jaylightnn08 |
Just tryin to find ecm spy. Anyone know where to download it from.If I have to pay for it i will. | ||
| Greg_e |
#1 do not pay for it, the old version was free and anyone selling it is even worse than redistributing it (which is also currently prohibited) #2 not going to do you any good with the 08 that you have, at least not until the newest version arrives, which may or may not cost money. | ||
| Xoptimizedrsx |
ecmspy.com download the ecmread_mono and the mono run time environment. the gtk.net. next read your ecm with that with the same cable as ecmspy. then download the tunrepro and the Xdf file that matches your ecm. you can convert the .xrp file to a Tunerpro file by renaming the .xpr to .bin. from there you have full power to read and write to your ecm. much more power than any other tuner has provided. It takes a few minutes to figure out but with a post i have somewhere else it explains a few things and you can be on your way to easy tuning. Mikehttp://ecmspy.com | ||
| Blake |
http://www.ecmspy.com/download.shtml | ||
| Its_a_buell |
dont mean to hi-jack the thread. but tuning the ecm has recently caught my eye. im green to the whole concept and i'd really like to try the above listed process. one little problem, i need whatever cable, software, or whatever it is. any help? if i get the "cable" can i just tap into that website without any further software? | ||
| Froggy |
American Sport Bike sells the cable. Then you can go to the ECMspy website and download everything you need from there. Also you can find the old ECMspy floating around elsewhere on the web too. | ||
| Xoptimizedrsx |
yes all you need is the software from ecmspy.com. Al and I do communicate off line from time to time on stuff.  mike | ||
| Vospertw |
Following the links above, the EcmSpy.com download page says the project has been shut down and the software is no longer available for download? "With the end of the project, the software is not available for download any more. ANY DISTRIBUTION OR HOSTING OF OUR SOFTWARE ON OTHER SERVERS IS PROHIBITED! | ||
| Froggy |
Yes that is referring to ECMspy which is discontinued. If you scroll down the rest of the tools are still available. | ||
| Vospertw |
Ok, I might not have caught on fast enough. Looking back at Xoptimizedrsx's post, I see what you are saying - all the tools to modify the ECM are available. | ||
| Its_a_buell |
ok, anybody wanna help get started here? ive got an 03 XB9S with and American Sport Bike open airbox kit and breather re-route. K&N filter and Buell race pipe. the previous owner also said it had the race ecm and since the other "race" parts were there i assumed it also was there. and it may be, i should probably verify that. but i feel like with the recent mods, it should be a little more...exciting. where should i start tweeking. or does anyone have a good tune that i could try? |
