| Author | Message | ||
     Nallac |
Can someone give me the part #'s for the new/best Front iso,and the best place on the net to order one?. American Sport Bike has these, seem like the old version? http://www.americansportbike.com/shoponline/ccp0-p rodshow/17025.html Thanks. | ||
| Buellistic |
The "QUESTION" you ask is, will this ISOLATOR hold up if in the BIG CUBIC INCH H-D DRESSER BIG TWINS ... "IF NOT !!!" Then you should get the H-D ISOLATOR PN 16207-79D !!! This PART NUMBER(PN) will be in the casting of the ISOLATOR and the high case "LETTER" after the -79 tell you what the latest up-date was ... The "D" indicates this is the "FIFTH(5th)" up-date on this part even though it package'ed with a BUELL MOTOR COMPANY(BMC) PART NUMBER which "i" call the "BUELLshitte" Part Numbering System ... | ||
| Sloppy |
The -79D is a great replacement for the Buell OEM part, but it does require the hole in the -79D isolator to be reamed a tad larger (1/2"?) in order for the bolt to go through. Also you will not be able to use the "D-Washer". Just use a suitable replacement washer instead. There are rumors that an improved Buell OEM part now exists. But the -79D is a significant improvement over the original design in many different ways so I'd recommend it. | ||
| Spiderman |
This is the new kit they were working on before the doors closed L1501.8 According to my buddy who was the test bed for the new isolators. It was better than stock and feels better than a XB... I got to hear about the re-design first hand so go with this kit you will not regret it! | ||
| Buellistic |
Spiderman: If you get a hold of one of these "BUELLschitte" Part Number'ed BMC Isolators L1501.8, lets us know what the HARLEY-DAVIDSON PART NUMBER is on the rubber casting ... Bet it is 16207-79D !!! | ||
| Spiderman |
Guess what, There isn't. It is a BRAND NEW design. Ground up! For someone who is a 'Buell Fan' you sure do rip on the part number structure a lot... | ||
| Ebutch |
Spidey does it look the same or different. Earlier front iso.  What is in Kit? | ||
| Buellistic |
Spideman: Must correct you, BUELL fanATIC !!! Using the HARLEY-DAVIDSON PART NUMBER'ing SYSTEM it is easy to tell by PART NUMBERs "WHAT RETRO FITs", when first used, and how many times it was up-dated ... Since you still ride a TUBE FRAME this HARLEY-DAVIDSON PART NUMBER'ing SYSTEM will work for you, example:the rear isolators BUELLschitte Part Number are no longer available from either H-D or any aftermarket source, so what do you do now ... Well you go to the local H-D Dealer and with the Part Number if you happen to know it and you buy yourself some rear isolators !!! This is what "i" talking about !!! "WISDOM FROM AN OLD SCHOOL HARLEY-DAVIDSON PARTS MAN, HARLEY-DAVIDSON UNIVERSITY CLASS OF 1959 !!!" | ||
| Mmmi_grad |
I agree the numbering system Buell set up sucks. The hd system not only works great but also is educational at the same time. Where in the hell was the official anouncment of this important remake. Is that channel dead too. | ||
| Buellistic |
Ebutch: "i" can see that the supplier is BARRY with their part number(what is that number) ... Some where on the casting there should be a H-D PN, five numbers a dash with two more numbers and a high case letter ... What is that number ??? | ||
| Spiderman |
The system works if you know it... Also it was the original system Erik used. No it looks like this.  | ||
| Spiderman |
Oh and before you ask Buellistic the numbers in my pic read as follows... LORD® J-21920 MADE IN CHINA no other numbers, this is a NEW part made just before the doors shut. If you would like I can have the test Muell email you... | ||
| Spiderman |
I just read the last sentence butch sorry about that... It comes with a large washer, two new mounting bolts and one large bolt that mounts it to the motor mount. On the older Buells, IE non-knotched frames the iso mounts under the frame. On newer knotched frames it mounts normally. I am sure a dealer type could post a PDF of the instruction kit... | ||
| Ebutch |
Buell iso is the only one I use.Maybe this one will last over 22,000 miles.Buell iso you can see out of your rear-view mirrors most of the time!!!!!  | ||
| Ebutch |
Thanks Spidey will order L1501.8  | ||
| Buellistic |
Spiderman: "PLEASE" have test Muell e-mail me(Ljenne73c@verizon.net)and "THANKS IN ADVANCE" !!! "THANKS" for the "INFO" on the ISOLATOR !!! Is that the by the numbers how to install list on the right of your picture ??? | ||
| Spiderman |
Like I said, there was a ton of work that went into this. AND you will be glad to know that the testing miles were done on a S2... This S2   | ||
| F_skinner |
Great job Spiderman. Great looking test Muell. f_skinner@yahoo.com | ||
| Spiderman |
BTW not my S2, that is the Muells... | ||
| Ebutch |
Spidey I,ve got an extra body set and it,s going to be White!!!!Is that S2 conversion S3 bag rack for S2?I have extra S3 Bags.Is rack still available? and how $$$$  | ||
| Spiderman |
LOL Like I said, not my S2. Yes that is a S3 bag rack convo, and I also have one on my S2. The one on mine is actually one of the first ones. The very first one is pictured above I am not sure if it is still available or not... | ||
| F_skinner |
I thought for sure that was your S2, even has the white air cover however, I do not remember your bike having the polished headers. | ||
| Spiderman |
Headers polished, but no white AC...  | ||
| Ebutch |
I need a parts # for S2 to S3 saddlebag-bracket please.  | ||
| Spiderman |
I emailed Court and I am doing some digging as well... | ||
| F_skinner |
I do not know if this will help but I grabbed it from the S2 Yahoo group site. Specific Saddlebag Ordering Information Saddlebag Kit (Deep) “ “ “ “ “ “ “ “ “ Color Primed Quicksilver Metallic Black Sapphire Candy Blue Yellow Jacket Pearl Parkway Blue Canyon Red Red Snap Ice White Pearl Part Number Z0725.8PMD Z0725.8Y A A Z0725.8Y AC Z0725.8YY AE Z0725.8Y AF Z0725.8Y AG Z0725.8YC Z0725.8YH Z0725.8YN C0799.M C0800.M Saddlebag Kit (Narrow) “ “ “ “ “ “ “ “ “ Color Primed Quicksilver Metallic Black Sapphire Candy Blue Yellow Jacket Pearl Parkway Blue Canyon Red Red Snap Ice White Pearl Part Number Z0700.8PMD Z0700.8Y A A Z0700.8Y AC Z0700.8Y AE Z0700.8Y AF Z0700.8Y AG Z0700.8YC Z0700.8YH Z0700.8YN C0804.M C0805.M I have the instructions and can email them to anyone if you send me an email to f_skinner@yahoo.com | ||
| Ebutch |
Bet The white air cleaner cover is Air-Tec.Looks Nice!Great Bike Muell!!  | ||
| Spiderman |
Nope, it is CF painted the stock color. The bodywork however is Airtech painted by the guys in the Booth at Buell... | ||
| Ebutch |
Just Bracket# Frank.Need it so I can use my extra S3 bags on S2.Thank you!If there is one that can be ordered Alone?  | ||
| F_skinner |
Bracket is L1025.8 |
