G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Vall345 Posted on Wednesday, March 17, 2010 - 08:39 pm:        Hey, guys. I just bought a new 1125R and plan on taking it to the Orlando this Friday. Until I get my service manual, I need some quick help. I want to take the shift light controller off my Warrior dragbike and use it on the Buell. I need to go to the ECM side of the coil stick on one of the cylinders. How easy is it to get to? Again, without a manual, I don't want to start tearing into it without at least a simple roadmap. Thanks in advance for your help. Glad to be on the team. Sam   Rageonthedl Posted on Wednesday, March 17, 2010 - 09:58 pm:        Im not 100% sure on the 1125 but on my xb i think its the pink wire. you can tap in near the speedo. thats what i did.   Oldog Posted on Wednesday, March 17, 2010 - 11:24 pm:        not likely to work the ic is on a serial data line, from the ecm, it includes the tach IIRC, one of the coil pulse trains perhaps not easy to get to. good luck   Kevin_stevens Posted on Thursday, March 18, 2010 - 01:16 am:        The tach needle does act as a shift light. I understand if it's not optimal for drag racing, but maybe you can tap into that signal. KeS   Vall345 Posted on Thursday, March 18, 2010 - 04:40 pm:        Thanks. I'll look it over when I get home. Hopefully, my service manual will be there when I arrive. Thanks again for the help. Sam

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: