Author |
Message |
Tipsymcstagger
| Posted on Monday, March 01, 2010 - 04:24 pm: |
|
Not sure if they're sponsor so I won't mention a name but one of the 20%-off dealers has free shipping on orders above $150 for the remainder of today. I'd like to order both wheels and all of the other bits I'll need (bearings, axles, bolts, etc). I know the info has been posted before but I'm hoping someone might have it on hand to quickly repost? I only want what's necessary to install the wheels. In other words, if my existing pulley and rotor, etc are compatible, I don't want/need those part numbers. TIA. Tipsy |
Court
| Posted on Monday, March 01, 2010 - 04:37 pm: |
|
All you need is the wheel kit I have previously posted.
|
Tipsymcstagger
| Posted on Monday, March 01, 2010 - 04:45 pm: |
|
Thanks Court...reuse all existing hardware??? I know you'd posted some part numbers for screws/washers/bolts in the past. Wasn't sure if those are necessary or if you were just being conservative in replacing them. I need the part number for 2010 front wheel "kit" too, if someone has it handy??? Both of my wheels are bent pretty badly so I might as well get a matching set. TIA. Tipsy |
Court
| Posted on Monday, March 01, 2010 - 04:51 pm: |
|
NO. Order replacement hardware, screws, washers, etc (E and F below). It's easy to get stuff but don't reuse hardware. Screws and something else . . . I'll scan my invoice and send you tonight if you'll e-mail me a reminder. |
Tipsymcstagger
| Posted on Monday, March 01, 2010 - 04:54 pm: |
|
quote:Screws and something else . . . I'll scan my invoice and send you tonight if you'll e-mail me a reminder.
No need Court...I found your old post with the part #'s for the hardware. But I can't seem to find any info for the front wheel??? Anyone??? Tipsy |
Court
| Posted on Monday, March 01, 2010 - 04:57 pm: |
|
What front wheel do you want/need? Just a spare? They are ( to the best of my knowledge) all the same. Just include the word FROGGY in the post and Little Cat "X" will be here in a moment to confirm and provide part numbers. You gotta admit . . . this place is the BOMB. |
Tipsymcstagger
| Posted on Monday, March 01, 2010 - 05:03 pm: |
|
LOL...thanks Court. I was under the impression that the 2010 front wheel was redesigned too. I know there were no bearing problems with the front wheels...but I thought I'd read that the part # for the front changed in 2010 as well. If that's not the case, I'll just look up the part number(s) for the 2008 front wheel in my parts manual. Tipsy |
Froggy
| Posted on Monday, March 01, 2010 - 05:03 pm: |
|
No changes to the front wheel for 2010. G0110.1AKAYBQ WHEEL, FRONT, MAGNESIUM TONE Retail Price:$336.00 Get the rotor and mounting hardware from EBR, its cheaper than HD. |
Court
| Posted on Monday, March 01, 2010 - 05:05 pm: |
|
>>>I was under the impression If Froggy and I need you to think . . . you'll be so directed.
|
Tipsymcstagger
| Posted on Monday, March 01, 2010 - 05:11 pm: |
|
quote:No changes to the front wheel for 2010. G0110.1AKAYBQ WHEEL, FRONT, MAGNESIUM TONE Retail Price:$336.00 Get the rotor and mounting hardware from EBR, its cheaper than HD.
Too funny! I just sent you an email, Froggy...two seconds later I see this! EBR has the hardware for both front and rear??? Tipsy |
|