| Author | Message | ||
     Slowride |
I picked up a Buell Display from one of the HD dealers pushing out their Buell inventory. What your looking at is a Half Moon Display that has a base plate that goes with it. It is currently behind the bike. The base plate has two upright mounts that let the Buell lean over like it is going around a corner, like the ones pictured in the display. It also has a neck support for the bike when it is leaned over. I'm not man enough to lean my CR over on the mounts so I will use it like this for a while. Whatcha think?   | ||
| 99buellx1 |
I wouldn't use that tipover stand either. Unless they made grand changes or improvements to it from the original we could never seem to get a bike on and off of it without it getting scratched somewhere. | ||
| Sportbikermed |
Looks sweet slowride. Nice find | ||
| Fresnobuell |
Huh. It looks like the bike is on the kickstand in front of a big 3-panel poster. | ||
| Americanmadexb |
That is freakin' sweet. What do you want for it?!!!  (Message edited by americanmadexb on March 01, 2010) | ||
| Slowride |
Fresnobuell, You have such a way with words... LOL... I did! I did, see a cr on its kickstand in front of three big poster boards.... The lean stand that goes with the panels are behind the bike on the floor. I also took off the Buell plate from the floor stand and put it in front of the bike just for kicks. | ||
| Nattyx1 |
SLow: I think you may have the bike facing the wrong way, given the way the art is laid out. Try it 180 degrees opposite. Let it lean INTO the corner. That'll also put the kickstand on the inside (hidden). And the combination (Fresnobuell) MIGHT just make it look a tad less like what it is. |
