| Author | Message | ||
     Kevinjgray88 |
just wondering if anyone ever installed an underglo kit on their buell. mostly 1125r. and how hard was it and how did you do it | ||
| Syonyk |
o.O The real issue would be finding somewhere to mount it that won't cook - that underslung muffler makes putting anything on the underside difficult. Or have you removed the stock muffler? | ||
| Kevinjgray88 |
no still got stock | ||
| Blackflash |
Go to your local autozone they have light strips pretty cheap.I used a 5" light strip on my plate .It lights the whole back of the bike up pretty good.I think it was 10$.I just stuck it with double sided tape to the plastic and used two tiny plastic screw.I dont have a picture of it lite up .But it definately lights the whole back of the bike up 10Ft round.Its a whitish blue color.This picture is really old  | ||
| Mountainstorm |
Take a look at EL wire. If you want an neat effect press the EL wire into any crevice or even use cable ties and tie it to whatever. Low voltage, low draw, lasts a long time. And you can cut it to length. Shorter lengths glow brighter. Less light than CCFL tubes or LEDs but provides a nice glow. I use the stuff to dress up n00bish PCs  | ||
| Kevinjgray88 |
hey blackflash how did you wire it. and i would like to see pics lite up | ||
| Blackflash |
I also taped/aimed one individual led on my shock spring at nightime to illuniate the red spring.I though about the pods but I haven't done it yet.The plate wires are right there thats as far as ive gone. | ||
| Blackflash |
Ill get one up tonight.I'm making a killer igloo right now.Man this igloo is huge.Im using the cooler to make the blocks .Ill post those picture up too.The little boy is amazed. | ||
| Blackflash |
Pull your cowl and seat off the wires are right there.Just trace them.Or use a test light to probe the wires.Or just use the led? | ||
| Chitwood |
Here are a couple if pics of mine.    | ||
| Kevinjgray88 |
thanks i am just so scared to touch anything wire wise because i have zero knowledge with them | ||
| Blackflash |
Fuses are there for reasons. You can just unplug the wires jam the new wires in the plugs and connect the two connectors together. That's all I did for the plate light. I'll get you a pic soon. | ||
| Illbuell |
 Red LED kit..with remote to help fine my bike around all the other CRs in the parking lot...LOL | ||
| Kevinjgray88 |
i think i am going to go with the el wire but how do i hook it up so i can turn it on and off | ||
| Kevinjgray88 |
is el wire very heat resistant im thinking by the engine and stuff | ||
| Kevinjgray88 |
i just bought a led kit from florida joe will post when complete |
