| Author |
Message |
    
Kevinjgray88
| | Posted on Saturday, February 27, 2010 - 08:46 pm: | 
|
how do the thicker caps for the clutch and stator do? and do they make them for the rev b or do you not need one if you have the rev b |
A_s_r
| | Posted on Sunday, February 28, 2010 - 02:34 am: |
|
... |
Mountainstorm
| | Posted on Sunday, February 28, 2010 - 09:50 am: |
|
I have no pictures of the damaged oil lines. They have since been replaced. Mainly just scratches as I went down in gravel.
The stator side was replaced once already. |
Skully
| | Posted on Sunday, February 28, 2010 - 11:17 am: |
|
Is it common for the case pucks to get ripped off in a crash? |
Duggram
| | Posted on Sunday, February 28, 2010 - 11:49 am: |
|
When I crashed last year at ~20 MPH it just ground it down. I have since gotten the aluminum pucks from Pete and Grandstand Designs. However I still want to get the case covers from EBR. |
Cataract2
| | Posted on Sunday, February 28, 2010 - 11:49 am: |
|
The plastic ones, yeah, they were never really meant to protect. From what I've found the new Rev C clutch cover now uses a metal puck. Think that the new one is meant to protect the cover. |
Kevinjgray88
| | Posted on Sunday, February 28, 2010 - 02:25 pm: |
|
so anyone find clutch and stator case covers or caps yet. that dont cost 300? there just has to be something out there. maybe something that is universal |
Buell101
| | Posted on Sunday, February 28, 2010 - 04:35 pm: |
|
This is a great thread besides for the typical off subject comments. I've gone down at the track more than once. The carbon fiber cases cover look good and work well... but only for 1 crash 2 if you go down under 30mph. I got pix but won't let me load (to big)I'm in for something aluminum... |
Kevinjgray88
| | Posted on Sunday, February 28, 2010 - 04:38 pm: |
|
me too i think dhm has something in the works i was told |
Duggram
| | Posted on Sunday, February 28, 2010 - 04:48 pm: |
|
I have these buttons from GSD. $60 and really simple to install. But like I said before, I still want some case covers. Kinda like wearing a belt and suspenders. |
Vtwinbuell
| | Posted on Sunday, February 28, 2010 - 05:43 pm: |
|
Is it common for the case pucks to get ripped off in a crash?
What was left of mine stayed in place, but it was the plastic one. |
Vtwinbuell
| | Posted on Sunday, February 28, 2010 - 06:08 pm: |
|
Here are the measurements. I have no way to measure the angle without pulling the cover off the bike, it can be calculated.
(Message edited by VtwinBuell on February 28, 2010) |
Duggram
| | Posted on Sunday, February 28, 2010 - 06:17 pm: |
|
Thank you for your sacrifice. Didn't you post these in another thread? |
A_s_r
| | Posted on Sunday, February 28, 2010 - 06:59 pm: |
|
Thanks Vtwinbuell, that will be very helpful  I'll get out the ol' trig book to calc the angle. |
Nillaice
| | Posted on Friday, March 05, 2010 - 10:46 pm: |
|
any updates on this project? ... would it helped if i pre-ordered |
