| Author | Message | ||
     Scout |
I'm moving and have these parts that I can't move. Name a price (let's be reasonable, but I'm easy). I'd rather a bueller be able to use these than scrap or trash. From an 04 XB12R - some scuffed up, some in great shape. I have high res pics and can provide any details you want. Parts in great shape: - **SOLD** Rear touring pillion - **SOLD** Mirrors - R and L - Front turn signals - R and L - Translucent Amber windscreen - smoke turn signal lens (in bag) - Front and Rear stock heel guards (hardware) - Side stand 'cg', pin (in bag)(shorter than normal, this was a replacement as part of the recall, but I think was for a 'cg' bike so I got the longer one later) Parts that are scuffed up: - Front quarter panel, racing red (looks good but missing L black headlight ring) - Tail section, racing red - R front and rear turn signals - Right mirror (dime sized rub on back of plastic) - ***SOLD***Rear sprocket - belt guard - Swing arm and swingarm brace - axle - header ***EDIT*** I also have stock clutch and brake lever (Message edited by scout on February 27, 2010) (Message edited by scout on February 27, 2010) (Message edited by scout on February 28, 2010) (Message edited by scout on March 01, 2010) (Message edited by scout on March 01, 2010) (Message edited by scout on March 01, 2010) (Message edited by scout on March 02, 2010) | ||
| Skizzy |
Do you have the rest of the plastics? How much for the ones pictured here? (Message edited by skizzy on February 28, 2010) | ||
| Froggy |
PM sent on the rear seat | ||
| Jreinke |
you have a stock rear seat? | ||
| Joel |
I could use the signal lens Joel | ||
| Scout |
Skizzy, that's all the plastics I have. The tail section is a bit scuffed up on the right side. PM me if you want, shipping from 32526, front piece is 6.5lbs 20x11x21, tail section is 6.5lbs 17x32x9.5 for shipping est. or tell me where it's going. Any price reasonable that covers shipping too will own these. | ||
| Scout |
Jreinke, no stock rear seat sorry. Joel, PM me your price and where you want it sent and it's yours if you paypal. (Message edited by scout on February 27, 2010) | ||
| Delta_one |
I just hope the rider heel guards are still up for grabs after pay day.  | ||
| Scout |
Delta one - just got first dibs, they're on hold for you - how long? | ||
| Scout |
Here are the pics of the levers and all the mirrors and turn signals I have. (Message edited by scout on March 01, 2010) (Message edited by scout on March 02, 2010) | ||
| Pontlee77 |
Hello, How much for the sprockets shipped to Amarillo in Texas? Thanks Miguel | ||
| Scout |
Pontlee77, I only have one rear sprocket, the pics are inside and outside views so you could see the condition. It'll cost me 10bucks to ship, PM me what you want to pay, looks like new it's 60, and this is definitely not new - give yourself a deal, it went down in an easy lowside and got knicked up. | ||
| Pontlee77 |
30$ shipped? i just need it as a spare. Thanks. | ||
| Scout |
Pontlee77, You have a PM. | ||
| Pontlee77 |
didn't get the PM you can email me at: pontlee77@telefonica.net | ||
| Captcaz |
Seconds on the sprocket if Pontlee backs out ... need it for an '03 upgrade. Thanks. | ||
| Tblasier_mmi |
how much for the header | ||
| Scout |
Captcaz, sprocket sold. Tblasier_mmi, PM. | ||
| Firebolt020283 |
how much for a set of the long mirrors? | ||
| Phelan |
Is the axle front or rear? | ||
| Darkwing |
im in florida. and may need your swing arm. and maybe the axle. | ||
| Buellblastrider |
is the swingarm brace in new shape? no scuff on it? mine has a few nicks in it and connsidering yours as a replacement? if its like new how much to 37660 | ||
| Chevnut55 |
how much for the fairing,i really just need the plastic thats not missing.but if cheap enough ill take the whole thing.area code 02718 | ||
| Scout |
Firebolt, Which mirrors do you want? This is like Priceline, make yourself a Shatner sized deal but cover my shipping too. I'll let you know if it's too low, so far I haven't. Phelan, rear axle Buellblastrider, brace has some rash on it, so not new. (Message edited by scout on March 01, 2010) (Message edited by scout on March 02, 2010) | ||
| Scout |
Chevnut55, I assume you mean the front fairing, it'll cost me about 13bucks parcel post, a lot more priority and up, to ship. Name your price, I won't be shy if it's too low, but I'm in a generous mood | ||
| Firebolt020283 |
is $25 too low for the pair to the right? | ||
| Scout |
Firebolt020283 you have a PM - or you're supposed to have one anyway. | ||
| Firebolt020283 |
replied | ||
| Greg_e |
I'm told I need right and left mirrors from an 04+ to get the added length on the arm, what you got leftover? If the arm and rubber are in good shape, that's what I really need since I can swap the actual mirror part with my current mirrors. Would you be willing to measure from the flat mount to the end of the mirror for me so I can make sure I'm getting an upgrade and not more of the same? Yes the used ones look fine to me as long as the glass is OK. (Message edited by Greg_E on March 01, 2010) | ||
| Scout |
Greg_e, I have a right and left mirror, the back of the mirror is scuffed up, but the glass is good. These are stock 04 firebolt mirrors. The 'arm' is 5 inches, from the mount base (not including the threads), to the ball joint at the inside of the mirror body. Overall straight line distance is about 11 inches, from base of mount to outside tip of mirror. Hope that helps. (Message edited by scout on March 01, 2010) |
