| Author | Message | ||
     Justa4banger |
OK no the ECM is not dynoed yet... but it will be on WED...so 2 days we will all know more. Anyone want to bet on gains LOL OK so i got the baseline runs in today. Tomorrow i get my HMF pipe, K&N, and EBR tune... so once i get the stuff, install it Wed i will go back to the same dyno. the dyno shop i went was awesome. we took out the front O2 sensor hooked it back up to keep from throwing a code, but tossed in his WIDEband O2 sensor to accurately measure the a/f ratio. the bike runs lean like we know... WOT runs were in 5th and it seems that the hotter the bike got it would loose exactly 3hp each run... probably due to timing more than anything. Baseline numbers are 126.5whp and 73.75 ft lbs of trq. So Tomorrow is UPS day, and then on wed i will have the EBR tune dyno numbers.. i will post the graphs overlayed together and i have some new pics of my Fairings with 2010 stickers, Blue dubble bubble installed and other various bits... I can't wait.. | ||
| Avalaugh |
Lovin the enthusiasm everyone has for these bikes, i think in the next year or so we will all have so much choice for tuning and aftermarket parts. Keep up the good work. | ||
| Moosestang |
Are you going to dyno it with the stock exhaust first? Please! It would be nice to see if there are any gains with just the race ecm, then you could see how much the muffler adds. | ||
| Fresnobuell |
Are you going to dyno it with the stock exhaust first? That would be interesting and something quite a few people would appreciate! I would like to see also if the slip-on race ECM would run Air/Fuel rich on the stocker. | ||
| Hdwrenchtx |
he said he gets his HMF K&N and ecm tomorrow so I think his baseline runs are all stock. | ||
| Fresnobuell |
Yes, the request is to run the race ECM on the stock exhaust. | ||
| Froggy |
Please post it up in the Dyno section too, thanks  | ||
| Justa4banger |
So a dyno with the EBR ECM and stock exhaust... Hmmm I could do it, but not on my dime gentlemen. 80.00 to dyno/gas/time and i can get more than a few pulls. so i could do a dyno with stock exhaust/ stock filter, stock exhaust and K&N, and then HMF K&N... I'll do it, it will take a few more days to get done.... Paypal is bugsy350(AT)hotmaledotCOM If i get 80.00 i'll gladly help out the masses. But otherwise i can't see spending my money to do it guys. sorry i just don't plan on running the bike in that configuration. BUT you guys need to act fast...because once everything is installed i don't see it coming off anytime soon. | ||
| Justa4banger |
Once i get all the dyno sheets together i'll gladly update the dyno threads.... If i get no feedback on the other runs requested, then i'll stick to the original plan.... | ||
| Mountainstorm |
Thanks J_banger I'm stuck in the snow  | ||
| Justa4banger |
Well i guess no one wants to know or pay to know LOL. sorry guys i wish i could do this for ya'll but the dyno shop is 1 hour away so that would consist of an extra day to get the tests you guys want completed. But i'm still willing. Members let me know. | ||
| Ridenusa4l |
how bout a run with the stock ECU and the modifications then one with the Race ECU and mods...would that be feasible for no money lol? Jake | ||
| Duggram |
4banger, thank you for doing this. | ||
| Ridenusa4l |
i second that!! Jake | ||
| Trekerguy |
Hey Kevin I found that Cali can and it's yours if you want it , mine works great ! Call me tomorrow Mark - | ||
| Justa4banger |
Cool beans mark.... OK so far i have 20.00 gents.....want it done then please help me help you guys... Man you guys are demanding... LOL What i'm going to do is call the shop tomorrow and see what i can work out for dyno time..... So we have baseline... YOU guys want Stock with EBR ECM only Stock exhaust, K&N and EBR ECM Then my HMF, K&N, and EBR ECM Lastly all mods without the EBR ECM. CORRRECT.. anything else... someone send me a race exhaust i'll dyno that too....  It good thing i have alot of time on my hands.... LOL On a serious note is the money .. As mentioned before i have 20.00 By no means am i asking to make money just enough to cover my costs. you guys come through and i'll come through for ya'll... oh and to those that have donated..thank you.. | ||
| Justa4banger |
OH if you donate please include your email and BW id so i can email you back... | ||
| Blackflash |
Make sure he prints Your runs all on one sheet. Keep the seperates for yourself.That way we can really look at the comparison. I hate that when people post charts with this then that on two seperate papers. Thanks justa4banger. Good luck. | ||
| Duggram |
Donation sent. Looking forward to seeing the printouts. | ||
| Easyrider |
You forget the run with the bone stock ECM. Please keep the engine temps every time the same, don't forget to reset the TPS every time before you make the run. that's it, good luck, can't wait to see results | ||
| Xelerator |
J_banger, what flash is on your bone stock ECM? Thanks Chris | ||
| Mountainstorm |
And I want you to check the air pressure in the tires and report on any barometric changes. And use Blue ink for the stock run, green ink for the... Just kidding Demanding. That's putting it lightly  Thanks a lot for doing it...the snow started this morning again some more. (Message edited by Mountainstorm on February 09, 2010) | ||
| Blackflash |
This snow is killing me as well.1000ft driveway doesnt help. | ||
| Mountainstorm |
How about a 6250 foot gravel driveway on a steep incline? Grrrrrrrr. | ||
| Easyrider |
Mountainstorm, Thank you for that (-: | ||
| Justa4banger |
Well now i have half of the donation.. thank you for those that have donated. as for dyno charts, don't worry guys this isn't my first rodeo... ill get all the right comparisons plus individuals. UPS says the stuffs in route, WHOO HOO Oh any other requests..i got a weird one to see me in a thong on the bike for the dyno run... that one was strange... but hey i'm game, just send me the thong.... LOL | ||
| Justa4banger |
You know its strange i keep hearing about all this snow and bad weather.... Vegas is getting some rain, but the weather overall isn't bad... i've already logged 250 miles in 3 days of riding, and got to the dyno wearing justa jacket and t shirt.  | ||
| Duggram |
I hear you! I'm in Albuquerque where it might snow in the morning but you can ride in the afternoon. Also, this weekend I'll be at Arroyo Seco finally getting a chance to put some time on my Torque Hammer. Life is good!! | ||
| Justa4banger |
Hey in march i'll be passing through albuquerque.. i'm heading back to dallas on 40.... I'll have the bike in tow... | ||
| Duggram |
That sounds good. Lets plan on a meet. |
