Author |
Message |
Oldnotbold
| Posted on Friday, January 29, 2010 - 04:12 pm: |
|
No where in my parts manual can I find these wire ties. These are the ones right under the instrument cluster. There are two, holding the wires just above the ignition switch. TIA, Dennis |
Maximum
| Posted on Friday, January 29, 2010 - 04:29 pm: |
|
I remember having that same issue a couple years ago...I finally had a dealer find me the right part, but don't know how he found it. I recently installed the heated grip kit on the new 1125R...and those wire ties were part of that kit too. I can try to find the parts list that came with the heated grip kit when I get home...unless someone else has it handy. |
Oldnotbold
| Posted on Friday, January 29, 2010 - 05:34 pm: |
|
Here's a picture.
Dennis |
Oldnotbold
| Posted on Friday, January 29, 2010 - 05:38 pm: |
|
quote:I recently installed the heated grip kit on the new 1125R...and those wire ties were part of that kit too. I can try to find the parts list that came with the heated grip kit when I get home...unless someone else has it handy.
Okay, thanks maximum, I just checked the heated grip kit and it does have one. Part number is 10177. I haven't installed mine yet. Still working on 08 triple clamps. Dennis |
Ronmold
| Posted on Friday, January 29, 2010 - 06:38 pm: |
|
Why not just use a regular tie-wrap? |
Bobbuell1961
| Posted on Friday, January 29, 2010 - 09:11 pm: |
|
I think that would also be an HD # 10081. there's 2 types, one with a christmas tree, the 10081, and one with a barb, i think it is a 10071. Bob |
Bobbuell1961
| Posted on Saturday, January 30, 2010 - 05:20 pm: |
|
Sorry, the one with a christmas tree is a HD#10177 |
Tootal
| Posted on Saturday, January 30, 2010 - 06:45 pm: |
|
Go to an electronics store, i.e. Radio Shack etc., they should have wire ties like those. I got a sampler pack from a vendor at work and it had some of these, that's what I used when I did the changing of the trees. Everything going ok Dennis? |
Oldnotbold
| Posted on Saturday, January 30, 2010 - 07:20 pm: |
|
I just got back from Longhorn H-D/Buell with the "Plug in cable straps". The old triple clamps are out and the 08 clamps ready to go in. Dennis PS Greg, PM sent. |
Tigeer
| Posted on Sunday, January 31, 2010 - 01:48 am: |
|
Thanks OldnotBold for asking the question & posting the photo b/c I also needed to know how to get new cable straps since I must replace those ties when I remove the Police Wiring Harness from my XP. |
|