G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Jayvee Posted on Thursday, January 28, 2010 - 02:44 pm:        I'm finally trying to install the springs I bought 4 years ago (even though I've gained, ahem, a 'few' pounds in the interim, right at 200#.) Just for a reasonableness check, can anybody who's done this advise what your spacer length wound up being? Also how much oil did you put in? I'm trying to get the Gold Valves in at the same time, so if you have done that, any advice, tips, or measurements used would be useful too. I checked all through the Knowledge Vault and tried several searches too. No details I could find on Cyclone forks. (Message edited by jayvee on January 29, 2010)   Skntpig Posted on Friday, January 29, 2010 - 11:37 am:        I was going to dive into that same thing myself. I sent the forks to traxxion dynamics and had them install everything for me. It was pretty reasonable.   Skntpig Posted on Friday, January 29, 2010 - 11:38 am:        I had the gold valves and they also put in a $25 kit that makes the gold valves better.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: