Author |
Message |
Blackdog
| Posted on Thursday, January 21, 2010 - 12:20 am: |
|
My bike fell over and caused some damage. I need some bare ends/weights for a little more protection. Where can I get them? |
Firebolt020283
| Posted on Thursday, January 21, 2010 - 12:24 am: |
|
pretty much any were, American Sport Bike sells them or ebay or any other place that sells motorcycle stuff. the bars on these bikes are the same standard size as most other bikes. (Message edited by firebolt020283 on January 21, 2010) |
Froggy
| Posted on Thursday, January 21, 2010 - 12:28 am: |
|
HVMP makes the best ones. |
Jstfkndi
| Posted on Thursday, January 21, 2010 - 07:48 am: |
|
Woohoo!! Thanks Froggy! I was just about to ask this same question today because I couldn't find any that weren't a combo throttle. Just wanted some rattle in the bar taken out and some protection! |
Roysbuell
| Posted on Thursday, January 21, 2010 - 07:58 am: |
|
+1 HVMP! They even powder coat them if you want. |
Firebolt020283
| Posted on Thursday, January 21, 2010 - 08:04 am: |
|
how much extra is the powder coated ones does any one know i was looking for some kind of color option but could not find anything like that. |
Froggy
| Posted on Thursday, January 21, 2010 - 10:36 am: |
|
Send Johnnylunchbox a PM, his wife is the one that makes them. They have black in stock last I heard, but any color under the rainbow is available if you desire. |
Boliver
| Posted on Thursday, January 21, 2010 - 01:45 pm: |
|
I bought my 2" mini mirrors from CRG direct.$50.00 a piece and nothing else looks quite as cool.Although they are quite small they are still easy to use.Well as much as a motorcycle mirror can be. |
Rkc00
| Posted on Thursday, January 21, 2010 - 04:41 pm: |
|
+2 on the HVMP. Not only are they nice so are the people who make them. Have the black powder coat on the CR and they look great. Have the original on the Uly. Mike Long Island, NY 09 XB12X Red/Black 09 1125CR Black/White 06 VRSCR Blue/Silver |
Gentleman_jon
| Posted on Thursday, January 21, 2010 - 04:51 pm: |
|
+ 3 HVMP. Stainless. They also seem to reduce handlebar vibration. Of course, the best way to reduce numb hands is not to hold on overly tightly.
|
Froggy
| Posted on Thursday, January 21, 2010 - 05:02 pm: |
|
|
Brightbuell
| Posted on Thursday, January 21, 2010 - 07:23 pm: |
|
Is that condom on your bar slider? |
Froggy
| Posted on Thursday, January 21, 2010 - 07:34 pm: |
|
Caterpillar o-ring/throttle lock. |
Court
| Posted on Thursday, January 21, 2010 - 08:35 pm: |
|
The HVMP product and experience are impressive. |
Paralegalpete
| Posted on Monday, January 25, 2010 - 09:28 pm: |
|
Mine are stainless from a sponsor Palmer products from the UK
|
Badrap
| Posted on Tuesday, January 26, 2010 - 03:20 pm: |
|
I made some direct replacements on my lathe out of 6160 Aluminum that use the factory hand guards. They look cool. I need to take a pick and show ya all. My next set will include an O-Ring grove to act as a throttle lock. |
Firebolt32
| Posted on Tuesday, January 26, 2010 - 06:37 pm: |
|
I may get kicked for saying this... You can also buy the inserts from Kawasaki handle bars and go that route as well. |