G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Jraice Posted on Saturday, January 09, 2010 - 05:50 pm:        I stripped a few bolts on the XB and will be removing them for some maintenance and would like to replace them in the mean time... The two front axle pinch bolts and the two front brake master cylinder machine screws need replacing.   Firebolt32 Posted on Saturday, January 09, 2010 - 06:45 pm:        I can't recall the size off the top of my head...but any hardware store should be able to match what they are. I go to ACE when I need just a hand full of some screws like that.   Jraice Posted on Saturday, January 09, 2010 - 06:52 pm:        Sounds good! Now to just figure out how to remove those MC screws!   Boney95 Posted on Saturday, January 09, 2010 - 08:12 pm:        Your dealership.   Froggy Posted on Saturday, January 09, 2010 - 08:24 pm:        The sizes are usually listed in the parts manual, but if possible just bring your old bolts with you and use it for comparison. I remember I lost the bolts and washers for the Ulysses bags, I was at my dealer and when the total got up to $60 for the hardware, the parts guy ended up just printing the instructions and highlighted the parts and quantities. The next day I stopped off at the hardware store and got everything for $1.14

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: