| Author | Message | ||
     Wera44 |
In the manual it shows a gasket between the airbox lid and the base but when I took mine apart to put the K&N in there was no gasket to be found. Is this normal? Im leaving the top off anyway but I just thought it was odd the manual shows it but it wasnt on the bike. | ||
| Endoman33 |
Wera44, there is a gasket on the bottom or base plate of the air box that sits around the intakes but there is not a gasket between the inner air box cover/lid and the bottom/base plate. Hope that helps | ||
| Xelerator |
I can see a gasket in the groove: http://froggypwns.com/images/CR%20Bar%20Swap/slide s/IMG_7400.html | ||
| Froggy |
Yep that is my bike, you can see the gasket partly hanging out in the lower left of that picture. | ||
| Wera44 |
Mine must have been built on friday around quitting time because the gaskets not there....  | ||
| Wera44 |
Thanks Micah, like I said if the manual didnt show it I wouldnt have given it a 2nd thought. | ||
| Redscuell |
Wera, the 'gasket' is just a 3/16" wide x 3/16" tall (that is, square) strip of closed cell foam. Not even sticky on the down side. You can make it yourself. |
