| Author | Message | ||
     Ebwhite |
anyone put XB footpegs on their m2 cyclone? do they fit? i think they would look better being all aluminum than the rubber type... | ||
| Brinnutz |
Won't fit without some modding...You know they made all aluminum ones for the tubers right? Have to watch eBay to find em or get the part number and have your dealer do a search for them... | ||
| Littlebuggles |
The Millennium pegs were an inexpensive cast alloy peg for the tubers. Might be hard to find now. They look great when polished. | ||
| Jayvee |
The Milleniums had been showing up frequently on eBay for about half what I paid for them at Vallejo Buell. They are cast though, not that pretty. | ||
| Ebwhite |
can anyone give me an idea of the part number or what these milleniums look like? i didnt find any on ebay | ||
| Daveswan |
Aluminum Millennium X1 Pegs Left Peg N0403.Q /Right Peg N0404.Q | ||
| Ebutch |
I have on 1999 S3 I ground to fit stock pegs and ground to fit XB pegs to fit and used JB weld to cement in place and the held-up 7 + years.  | ||
| Daveswan |
These are interesting billet pegs out of Europe. http://www.oberon-performance.co.uk/acatalog/Buell M2Cyclone.html $39 euros equals $55 US for the pair. I'm not sure what the shipping charge is. I've seen some newer billet pegs in a Buell catalog for $85 each which would be $170 for the pair and they don't look as good as those Oberons. I've also seen the X1 pegs on EBay for about $20 or $30 each - I don't remember exactly. (Message edited by daveswan on December 21, 2009) | ||
| Brinnutz |
http://cgi.ebay.com/Buell-X1-M2-S3-Right-Side-Bill et-Aluminum-Footpeg_W0QQitemZ220530726506QQcmdZVie wItemQQptZMotorcycles_Parts_Accessories?hash=item3 358a7d66a | ||
| Tripp |
millenium pegs are still available for a little over $100 a pair (includes hardware, springs etc.) from precision hd/buell |
