Author |
Message |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Philp
| Posted on Saturday, December 19, 2009 - 11:16 pm: |
|
Hi Everyone, Sorry if this has been covered but can anyone give advice on how to get more of what's behind me and less of my forearms in the mirror? The mirror housings are fixed on the stalks, which only collapse forward (I have no idea why they do that, other than it's convenient when lining my bikes closely in the garage). Anyway, I have pushed on the glass and have it as far as I think it can go and I still see my arms in 1/2 the viewable area. Any advice is appreciated. Thanks! Phil |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Micro
| Posted on Saturday, December 19, 2009 - 11:51 pm: |
|
i just decided to play with mine a little on the way home tonight. i've discovered that if you push them in the opposite direction that you think you need you'll see a little more of what you are looking for. weird but it works for whatever reason. still not a great view but much better than before. push them all the way towards the inside. let me know if that helps. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Leroysch
| Posted on Sunday, December 20, 2009 - 01:35 am: |
|
I had the same problem...just wasn't seeing enough. Took the stalks off and put some bar end mirrors, from American Sport Bike, on. Better visibility and a better look, IMHO. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Reducati
| Posted on Sunday, December 20, 2009 - 08:27 am: |
|
on the cr, loosen the whole mirror base, and slide it forward, retighten..![](http://www.badweatherbikers.com/buell/clipart/zoomingsmiley.gif) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Bmonty72
| Posted on Sunday, December 20, 2009 - 09:49 am: |
|
I did that on my CR (rotated the whole base forward). Unfortunately, this also rotates your levers forward!!! |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Milleniumx1
| Posted on Sunday, December 20, 2009 - 10:56 am: |
|
I'll put this into the "I must have gotten lucky" column. Mine were perfect for me, and I've not touched them other than pulling off the little sticky on the reflective surface of the right mirror. I hope they never move! Mike |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Philp
| Posted on Sunday, December 20, 2009 - 09:58 pm: |
|
Thanks Everyone for the tips. Micro, I tried pushing the opposite way but it didn't really help. The truth is there is not a lot of play up-down or in-out. Leyroysch, bar end mirrors might be an option. Did you pull off the stock? If so, what did you do to cover the mounts on the fairing? Burying the wires is easy but it seems you would still have the hardware there. Others with a CR, I think the setup is different. Thanks again, Phil |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Tyrroneous
| Posted on Monday, December 21, 2009 - 12:52 pm: |
|
For the 1125R mirrors to be effective one would need to mount mirror extenders between the fairing and the base of the mirror. I've poked around the web, but haven't come across anybody that manufactures them for the 1125R. Does anyone know of a source for 1125R mirror extenders? |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Zac4mac
| Posted on Monday, December 21, 2009 - 02:40 pm: |
|
I couldn't get mine to work for me so I replaced them with Firebolt long-stem mirrors. Dropped right in the holes, best m/c mirrors I've ever used. I ran the turn signals to the running lights. Been that way over a year and a half. Z |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Leroysch
| Posted on Monday, December 21, 2009 - 09:40 pm: |
|
Yes, pulled off the stock stalks and covered the holes with http://grandstanddesigns.com/shop/index.php?l=prod uct_detail&p=57}The blue ones worked great with my artic white '09. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Jrfitzny
| Posted on Monday, December 21, 2009 - 10:26 pm: |
|
pics anyone? Thanks in advance. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Thefleshrocket
| Posted on Monday, December 21, 2009 - 11:32 pm: |
|
I'd be interested in mirror extenders. I've used them on my SVs and GSX-R with good results. http://cgi.ebay.com/ebaymotors/Suzuki-SV650-S-SV65 0S-SV-03-09-Mirror-Extenders-Spacer_W0QQcmdZViewIt emQQhashZitem414b5d3c96QQitemZ280437275798QQptZMot orcyclesQ5fPartsQ5fAccessories My Daytona 675 also had pretty worthless mirrors. Interestingly, SV/GSX-R mirrors bolt right on and give about another inch of visible area. Now instead of seeing just my elbows, I can see half elbows and half of that's behind me. I don't like bar end mirrors one bit. (Message edited by TheFleshRocket on December 21, 2009) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Thefleshrocket
| Posted on Monday, December 21, 2009 - 11:57 pm: |
|
I found these XB12R mirror extenders. https://www.ironmachine.com/product_info.php?cPath =47&products_id=28&osCsid=tk3mb081ev6rohidou1g01cq r3 Then I found this thread about a guy who put 1125R mirrors on his XB12R. http://www.buellxb.com/Buell-XB-Forum/Buell-Firebo lt-XB12-XB9/my-new-1125-mirrors-on-my-xb12r So if 1125R mirrors will work on an XB12R, will XB12R mirror extenders work on an 1125R? |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Tyrroneous
| Posted on Tuesday, December 22, 2009 - 09:56 am: |
|
One would think so. Can anybody confirm the backwards compatibility of the XB12R mirror extenders on an 1125R? |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Zac4mac
| Posted on Tuesday, December 22, 2009 - 11:46 am: |
|
The bolt size and spacing is either identical or close to it. Pretty sure I'm using the same 10mm wrench on the Firebolt mirrors I used on the OEM 1125R mirrors. The link to "ironmachine" shows extending a set of "short stem" Firebolt mirrors. I used later model "longstem" that are about the same as they picture, extended. Looks like they should work fine but you may need to drill a hole for the blinker wiring. Z |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Thefleshrocket
| Posted on Tuesday, December 22, 2009 - 11:50 am: |
|
If someone decides to take the plunge and order a set of Iron Machine extenders, please post up with your experience. If they work without too much fussing and look good, I'll buy a set. (Or if someone here wants to do one better and design a set that are at least as good as the Iron Machine ones and cost less, I'd be all for that too.) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Thefleshrocket
| Posted on Wednesday, December 23, 2009 - 10:07 pm: |
|
Speaking of mirrors, my 1125R arrived today. I got the mirrors aligned the way I want them, but on the ride home, once I got past 50-60mph, the force of the wind would push the mirrors in a bit. I checked the mirrors at their base as I'm used to seeing a bolt I can tighten but there doesn't appear to be anything I can tighten at all. I must be missing something, but what? |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Jackgraves
| Posted on Thursday, December 24, 2009 - 01:38 pm: |
|
im gonna hit mine with a hammer at the rotate point to tighten them maybe it will pinch itself tight |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
No_rice
| Posted on Thursday, December 24, 2009 - 01:48 pm: |
|
i just take them off and throw them in a box... |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Tq_freak
| Posted on Thursday, December 24, 2009 - 03:26 pm: |
|
+1 No_rice that's where mine are |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Skully
| Posted on Thursday, December 24, 2009 - 03:38 pm: |
|
We have mirror block off plates in plain aluminum and black anodize:
![](http://www.badweatherbikers.com/buell/messages/290431/524199.jpg)
![](http://www.badweatherbikers.com/buell/messages/290431/524200.jpg) Keith DarkHorseMoto, LLC A Proud Sponsor of BadWeB http://www.darkhorsemoto.com |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Ridenusa4l
| Posted on Thursday, December 24, 2009 - 04:34 pm: |
|
I know this is in another thread alreadym and probably the same idea, but just drill 3 holes in them and put the LED's for the turn signals in them, and wire them up and there u go hahaha....please keep us all informed (or at least me ) on the progress of the turn signals. THANX Jake P.S.- I dont mean to be pushy or step on anyones toes...MERRY CHRISTMAS!!!! |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Thefleshrocket
| Posted on Thursday, December 24, 2009 - 05:39 pm: |
|
Jack, let me know how the hammer method works for you. I may well give that a shot myself. I still can't believe there's not just some bolt at the pivot point that can be tightened. EVERY bike I've owned with a fairing has had pivot bolts that can be tightened except the 1125R. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Marcodesade
| Posted on Thursday, December 24, 2009 - 07:27 pm: |
|
Skully, may I second the previously advanced suggestion that your block-off plate would make the great start of a flush-mounted turn signal. After that there are a wealth of good bar end mirrors on the market . . . |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Skully
| Posted on Thursday, December 24, 2009 - 08:25 pm: |
|
You guys are making it difficult to say no! Any chance you can point me to an existing product that is basically what you are looking for? Merry Christmas, Keith |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Hdwrenchtx
| Posted on Thursday, December 24, 2009 - 08:32 pm: |
|
i was kind of thinking they could be modded to make the mirror extenders mentioned earlier. or something like that could be made |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Leroysch
| Posted on Thursday, December 24, 2009 - 10:52 pm: |
|
My Xmas break project is to decide whether to wire the running lights (replaced with amber units from American Sport Bike) as turn signals (Al's idea) or to use a SS switch from Custom Dynamics which would interrupt the power to the running lights, achieving the same purpose. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Marcodesade
| Posted on Thursday, December 24, 2009 - 11:12 pm: |
|
I had in mind something that looks more or less like this: http://cgi.ebay.com/ebaymotors/Motorcycle-Turn-Sig nals-Blinker-Flasher-Flush-Mount_W0QQcmdZViewItemQ QhashZitem27a7ae79abQQitemZ170316954027QQptZMotorc yclesQ5fPartsQ5fAccessories I would like the base to be black anodize and the electronics should be something outrageously bright (like XBLights products). I would prefer plug and play (i.e. no need to externally slow down the blink rate). A tall profile (easy to see from the side as well as the front) would be important to me as well. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Ridenusa4l
| Posted on Friday, December 25, 2009 - 03:41 am: |
|
Keith, This is VERY crude, but i am artistically challenge lol..
I hope this helps lol... Jake |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Marcodesade
| Posted on Friday, December 25, 2009 - 11:10 am: |
|
+1 --- but I would load it up with enough LED's to make it really bright. I wouldn't personally be interested in a unit that only blinks to satisfy that DOT requirement to have a blinker. I'd want mine bright enough to actually get the attention of drivers around me. Also, I had envisioned something with a lens over the LED's (like the link to the cheap ebay crap I posted) but Jake's conception looks like it could be the foundation for a very elegant solution . . . |