Author |
Message |
Tblasier_mmi
| Posted on Saturday, December 12, 2009 - 08:00 pm: |
|
I have a chain converted swingarm for a XB but the only piece that I am missing is the chain tensioner. The piece that idler pulley usually goes. If any of you out there have one that you are not using, it would be a big help. |
Tblasier_mmi
| Posted on Monday, December 14, 2009 - 07:38 pm: |
|
Bump. |
Loose1
| Posted on Monday, December 14, 2009 - 08:05 pm: |
|
If you have a chain swingarm you shouldn't need the idler sprocket. You can get the slack out of the chain by adjusting the axle. Matt |
Sd26
| Posted on Tuesday, December 15, 2009 - 02:32 pm: |
|
I think it would slap the swingarm around pretty bad without it. I have one, but it needs to be sold with my whole swingarm set up. |
Tblasier_mmi
| Posted on Tuesday, December 15, 2009 - 08:32 pm: |
|
lol and just curious, what are you selling the whole set up for. I will probably just get one henry. |
Sd26
| Posted on Wednesday, December 16, 2009 - 03:16 pm: |
|
Travis, I'd like to have $900 for the whole thing. Whole thing would be the swingarm with oil lines, chain, two rear sprockets (43,44 I think), one front sprocket (21 I think), Brembo rear caliper & bracket with an OEM master cylinder & line, rear axle, three sets of the rear wheel spacers (one rotor spacer and two rear wheel bearing spacers for each wheel), the infamous idler (LOL!), and I'd throw in an XB9 primary. I believe my swingarm is a Hal's swingarm. I've got some simple pictures here... http://www.team-visionsports.com/forsale.html |
Tblasier_mmi
| Posted on Thursday, December 17, 2009 - 06:44 pm: |
|
wow that seems like a decent deal. If i needed the whole thing I would probably get it from you. Ill keep you in mind and see if anyone I know needs one. |
Sd26
| Posted on Thursday, December 17, 2009 - 06:58 pm: |
|
Thank you! |
|