| Author | Message | ||
     Gotlime |
There are sooo many options. What works? I like the bar ends with the blinkers and the CRG mirrors, but that's a pricey set-up. Can you tell me what you're running, how much it set you back, and how difficult it was to install? Pics and links would be greatly appreciated as well. | ||
| Carbonbigfoot |
Here's what I did with the blinkers, and I will eventually do one of the Rizoma bar end mirrors...   google "amazon bullet led signals" and it should take you to them. R (Message edited by carbonbigfoot on November 30, 2009) | ||
| Kevin_stevens |
I really like your signals, but came to the conclusion they wouldn't work with clubman bars, at least not easily. The brake lines are in the way. KeS | ||
| Hdwrenchtx |
those look pretty cool. did you need a load equalizer? do they blink faster than stock? | ||
| Badlionsfan |
Hd, you're replacing leds with leds. no resistor should be required. | ||
| Hdwrenchtx |
yeah i forgot | ||
| Xtreme6669 |
but the stock mirror led's have a resistor built in to make it similar in resistance to a filament bulb... if you put aftermarket led's on it will likely flash faster. mine do. | ||
| Ft_bstrd |
I would probably go with this set-up if it was mine: Oberon Performance | ||
| Xtreme6669 |
on the last link, 14mm id bar end is pretty close to 9/16ths, you would have to drill out the bar as its less than 1/2" id. or shave down the bar end insert to use these on a CR model. | ||
| Andros |
i got the 19mm oberon mirros and it was a straigt fit, no need for drilling or messing around. | ||
| Whynot |
According to an email I got from Oberon, "all bar end products under 22mm come with all collets to suit 12-19m." I'm looking at the LEDs plus the oblong mirrors ... also looking at the *price*  | ||
| Xtreme6669 |
I guess it depends on how far the bar end goes in... there is about an inch of end that's bigger, then it shrinks down below 1/2 inch id. If your just fitting a standard bar end it would be fine but the ones that came with my hand guards go in about 2 1/2 inches and would not fit. Looking at the pics in the link with the led bar ends it seems they also go in pretty far...? | ||
| Whynot |
I emailed them and they got right back with answers. | ||
| Smoke4ndmears |
there is an interesting ducati/buell hybrid setup on ebay |
