G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Jackgraves Posted on Sunday, November 29, 2009 - 03:43 pm:        I have no idea how to use my guage pod to check my AFV's on my 2008 1125R. please help me.   Chevycummins Posted on Sunday, November 29, 2009 - 03:49 pm:        Hold down the mode and toggle and turn the key on, it will be in diag mode now. AFV is near the end of all the info you need to toggle through.   Jackgraves Posted on Sunday, November 29, 2009 - 04:06 pm:        Thankyou chevycummins   Joebuell Posted on Sunday, November 29, 2009 - 06:55 pm:        1. would this be the afv last recorded when the motor was previouslly turned off? 2. is the diag mode a read only sort of affair, or are there things in there to reset? is all this stuff in the service manual?   Badlionsfan Posted on Sunday, November 29, 2009 - 08:11 pm:        1. Yes 2. Pretty sure it's FYI, may be able to clear codes, not sure never had to. Yes all this should be in the service manual or electronic diagnostic manual, not sure which.   Dirty_john Posted on Monday, November 30, 2009 - 08:12 am:        see the electronic diag manual   Krash01 Posted on Monday, November 30, 2009 - 09:08 am:        What is "afv"? Sorry for the noob question.   Zac4mac Posted on Monday, November 30, 2009 - 10:10 am:        AFV is a number that reflects what the ECM thinks is proper fueling for YOUR bike. An AFV of 100 applies the fuel map as it is. Less than 100, the ECM is reducing the amount, over 100 and it is adding. There is a vague correlation to altitude, but other factors are also at play. Zack   Rocketsprink Posted on Monday, November 30, 2009 - 10:32 am:        both mine are 100. Not bad I guess   2thepoint Posted on Monday, November 30, 2009 - 12:25 pm:        A value under 100 means your bike was rich and a value over means the bike was lean?   Lovedabueller Posted on Monday, November 30, 2009 - 03:46 pm:        ON this subject is there. HOW DO YOU RESET THE CODES......anyone with a manual..mine will be here in a couple weeks. keith

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: