Author |
Message |
Knickers
| Posted on Sunday, November 22, 2009 - 12:40 pm: |
|
I've decided to part out my 1050 race motor and stick with running stock from here on out. I had a transmission failure at the first race weekend this year, so everything but trans and cases is still in good shape. The original motor had about 7000 miles on it in an 03 XB before being built into a race motor. As such it has about 8 track days and 3 race weekends on it, all run with the stock rev limiter set at 7500 rpm. Here's a copy of the dyno sheet from Hoban bros after I had it updated to the Buell Race ECM (the real - programable one)
Here's the original build sheet from Hoban's.
If there's something you're looking for and don't see here let me know. Let's start with the crank. This is a Darkhorse (http://www.darkhorsecrankworks.com/)lightened 2003 XB9 crankshaft. As noted above it was never run above the stock rev limit of 7500 rpm. Asking $575
for reference here's a pic of a stock crank.
More to come... (Message edited by knickers on November 22, 2009) |
Knickers
| Posted on Sunday, November 22, 2009 - 12:49 pm: |
|
Millenium cylinders 3 9/16 bore. Asking $475
The rear cylinder has some material removed from two fins on the pushrod side to get better clearance for the pushrod tube bolts. (circled in red)
|
Knickers
| Posted on Sunday, November 22, 2009 - 12:59 pm: |
|
Heads. I measure these at 1.9 intake and 1.615 exhaust. As noted on the build sheet this was $1000 work into the heads. Asking $800
Here are a couple of shots with the stock valves (intake/exhaust) in the pic for reference.
Aftermarket springs installed - stock spring in the pic for reference.
|
Knickers
| Posted on Sunday, November 22, 2009 - 01:03 pm: |
|
Redshift 585 Cams. $590 new, asking $400. Also have a set of stock XB Cams $125
(Message edited by knickers on November 22, 2009) |
Knickers
| Posted on Sunday, November 22, 2009 - 01:06 pm: |
|
Crane lifters $195 new, asking $95 Also have a set of stock lifters - $50
|
Knickers
| Posted on Sunday, November 22, 2009 - 01:11 pm: |
|
XB Rockerboxes with Crane roller rockers. Asking $225.
|
Knickers
| Posted on Sunday, November 22, 2009 - 01:13 pm: |
|
Adjustable pushrods $50
Zippers adjustable pushrod tubes. One pair is brand new, I only installed these on the rear cylinder to fix a leak. $100
|
Knickers
| Posted on Sunday, November 22, 2009 - 01:17 pm: |
|
Race ECM. I want this to go to a licensed racer. Day before yesterday I wouldn't have cared, but I don't want to get Erik in trouble. $770 new, asking $550.
|
Knickers
| Posted on Sunday, November 22, 2009 - 01:19 pm: |
|
Dobeck Teclusion fuel injection module. Had this on the bike before I wen't with the race ECM. I have the manual for this. $260 new, I'll take $80.
|
Knickers
| Posted on Sunday, November 22, 2009 - 01:24 pm: |
|
Stock XB9 cylinders & pistons. $250
|
Knickers
| Posted on Sunday, November 22, 2009 - 01:30 pm: |
|
Stock 2003 XB9 throttle body assembly. I've removed the throttle cable bracket which I'm using on the stock engine. I have a 2007 throttle cable bracket that I can include though. $75
Coil - new in box $45
Coil & spark plug wires used $30
Oil pump $75
Alternator $75 (some marks where I had to dremel off a stripped fastener. circled in red)
|
Knickers
| Posted on Sunday, November 22, 2009 - 01:36 pm: |
|
Starter $100
Bronze oil pump drive gear $30
XB9 primary & chain $125
Clutch assembly (no drag racing - 6 race starts) $125
Stock XB9 ECM
|
Hogs
| Posted on Sunday, November 22, 2009 - 02:09 pm: |
|
Nice looking Crank and rods, But they are full of Holes...! :-) I`ll take the Bronze oil pump drive gear $30 Sure don`t look like much improvement for all that gear in that dyno chart though... GUys with a pipe /ecm, filter were making close to 100 RWHP in the exhaust shoot out?? What about the big bore Pistons are they for sale with them Jugs? (Message edited by hogs on November 22, 2009) (Message edited by hogs on November 22, 2009) |
Slaughter
| Posted on Sunday, November 22, 2009 - 02:10 pm: |
|
Is that race ECM the newer Windows system or the DOS based? I am assuming that it is DDFI 2, correct? |
Knickers
| Posted on Sunday, November 22, 2009 - 02:25 pm: |
|
Hogs - PM me your address. I scrapped pistons when I tore the motor down because the wrist pin retainer grooves were distorted such that I had to press out the pins. I do have a set of CP piston rings that I'll thow in with the deal - new in box. All I can say about power is all dyno's are different. This one should have hit 90 if they took it to 7500 rpm, that chart maxes out at around 7200. (Message edited by knickers on November 22, 2009) |
Knickers
| Posted on Sunday, November 22, 2009 - 02:37 pm: |
|
Steve - Yes, its DDFI 2 windows based. Here's a screenshot..
|
Slaughter
| Posted on Sunday, November 22, 2009 - 06:51 pm: |
|
Hmmmm I'm negotiating to buy a thrashed XB to convert into another racer. If that comes through, I'll need the ECM, cables and software. Thanks! |
Thejuicer
| Posted on Sunday, November 22, 2009 - 08:35 pm: |
|
2nd dibs on the bronze gear if hogs passes |
Cumminspowered
| Posted on Monday, November 23, 2009 - 07:36 pm: |
|
pm sent on Dobeck Teclusion |
Knickers
| Posted on Wednesday, November 25, 2009 - 07:58 am: |
|
Race ecm is spoken for. I can also go with a package deal if anyone is interested. Heads + 585 cams + Millenium cylinders + lifters + roller rockerboxes + pushrods for say $1000. Any other combinations just let me know and we can work something out. The rest will be going up on ebay in a week or so. |
Knickers
| Posted on Friday, November 27, 2009 - 11:54 am: |
|
Techlusion module is sold |
Knickers
| Posted on Tuesday, December 01, 2009 - 04:43 pm: |
|
The following parts are sold.. Crank Heads Millenium Cylinders Redshift Cams Crane lifters Roller Rocker boxes pushrods zippers pushrod tubes Still available... Stock cylinders Stock XB9 Pistons Stock Cams Thrtl body Alternator & starter oil pump drive gear coils primary & clutch stock ecm |
Knickers
| Posted on Friday, December 04, 2009 - 11:26 am: |
|
Race ECM is still avialable. |
Knickers
| Posted on Thursday, December 10, 2009 - 04:28 pm: |
|
Bump. Still available... Stock cylinders Stock XB9 Pistons Stock Cams Thrtl body Alternator & starter oil pump drive gear coils primary & clutch stock ecm race ecm |
Knickers
| Posted on Friday, December 18, 2009 - 05:05 pm: |
|
Oil pump drive gear sold. Still available, one more week before ebay bound. Stock cylinders $100 Stock XB9 Pistons $50 Stock Cams $100 Thrtl body $40 Alternator & starter $50 each coils $25 primary $75 clutch $100 stock ecm $25 race ecm $500 |
Thejuicer
| Posted on Sunday, December 20, 2009 - 08:55 am: |
|
Received the bronze gear in the mail yesterday...thanks alot!! |
Methed
| Posted on Thursday, December 24, 2009 - 10:05 pm: |
|
PM'd ya a few days ago--no response. Gimme a shout when you get a chance, please. |
Knickers
| Posted on Sunday, December 27, 2009 - 09:27 am: |
|
Sorry, been offline for a few days. Emailed you back. |
Bluzm2
| Posted on Sunday, December 27, 2009 - 12:00 pm: |
|
Will that starter work on a tuber? If so, I'll take the starter. PM me on how to proceed.. Brad |
Ferocity02
| Posted on Sunday, December 27, 2009 - 04:50 pm: |
|
$500 for a Race ECM? What's special about it? |