Author |
Message |
Buffalobab
| Posted on Friday, October 30, 2009 - 09:02 pm: |
|
just bought the pipe and got it mounted but theres one major problem... the bracket on the end of the pipe does not line up with the bolt holes from the frame... do i need to fab some sort of bracket or am i being retarded? Help is much appreciated Bob. |
Phelan
| Posted on Friday, October 30, 2009 - 09:03 pm: |
|
There is supposed to be a bracket that comes with the Force to bolt from the Flange on the pipe to the mounting bolts that held the original bracket on. |
Buffalobab
| Posted on Saturday, October 31, 2009 - 09:55 am: |
|
ill look through the packaging again... can you describe this bracket at all? thank you |
Phelan
| Posted on Saturday, October 31, 2009 - 05:04 pm: |
|
Been a while since I had a Force but I remember having to take the old bracket off and installing the new bracket. If you can't find it, you may try to contact Force and see if they'll sell you a replacement bracket. |
Eshardball
| Posted on Saturday, November 07, 2009 - 07:27 am: |
|
Go get a generic good quality exhaust hanger and bend to fit. The back of the pipe mounts to the underside of the motor.Mount it to the frame and things will be snapping off in a very short time. Love my Force pipe and no problems since cutting off the original front bracket and using a stainless band clamp in its place but mine is an early one. |